Part of occupant s body caught between vehicle and other object in nonroadway transport incident · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Exel, Inc., 554 Nissan Parkway, CANTON, MISSISSIPPI 39046
on — Amputations, affecting the lower leg(s).
Final narrative
An employee was operating a stand up forklift travelling east bound, forks trailing, behind another stand up forklift. Forklift 2 began to turn left into a staging lane to deliver parts. The employee attempted to pass Forklift 2 on the right side. As he was passing, he saw an oncoming forklift (3) travelling west. He made a quick right-hand turn to avoid the westbound forklift (3) into aisle 45 and struck a protective barricade that attached to the concrete that protected the barrier. The employee's left foot was pinched between the barricade and the back of his stand up forklift resulting in severe soft tissue damage and multiple leg fractures. The left leg was amputated below the knee.
AmputationLower leg(s)Forklift, order picker, platform truck-powered
An employee used an attached rope to pull a door down and close it, then placed his foot on the foot bar to lock it. The rope looped around his foot. When he began to walk away, he tripped and was swung around, causing his left foot to come out from beneath him. He fell onto his right hip and broke it. He was hospitalized, requiring surgery.
An employee was exiting a trailer after putting a label on a skid inside the trailer. The trailer began pulling away and the employee fell to the ground. The employee sustained fractures to their ribs on the right side, right kneecap, and a left toe.
The injured employee was sitting in a parked forklift while another forklift was moving two metal tire racks. The top rack was empty and the bottom rack contained tires. As the racks were being lowered to the ground, they fell and the top rack struck the injured employee. The employee was hospitalized with lacerations and a fracture to the left foot, and they required surgery.
An employee was driving a stand-up counterbalance forklift down an aisle in a warehouse. The forklift abruptly turned; the employee's leg moved and the dead man switch activated, throwing the employee out of the forklift. Their right leg was crushed between the material-handling equipment and a racking system, and it was amputated above the knee.
An employee was attending a training course at the corporate office. At the end of the course, the group went outside to a patio to take a photo. The employee slipped off the patio stairs and fell to the grass-covered ground at the same level. He was hospitalized with a broken femur and broken hip.
An employee was training on an rolling container carrier on the dry, non-frozen storage side of the distribution center. She made a turn around the end cap and her right foot struck the rail protecting the endcap racking. The employee's foot was fractured.
An employee was a passenger in a utility vehicle that was driving up a hill on a wooded trail. As the vehicle made a right turn, three fingers on the employee's right hand were caught against a tree and fractured.
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was operating an extruder and performing a spool swap over from the right spindle to the left spindle. After rewiring the new spool, the employee's clothing got caught in the turning shaft when the left spindle started back up. The employee's left arm was pulled into the machine, resulting in a fractured humerus and lacerations to her triceps. She was hospitalized and required surgery.
An employee was resetting a warehouse racking system utilizing an order picker. They fell approximately 5 feet from the order picker to the concrete floor and sustained fractured ribs.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.