MP Global Products, LLC

An employee was cleaning hoppers when they noticed buildup in the dust cyclone. The employee went to clear the buildup when their fingers were caught on the dust cyclone's air lock, resulting in partial amputations.

An employee suffered four left-hand finger amputations while performing maintenance on the rotating drum of the Opener #1 machine.

An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.

An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.

An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.

An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.

An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was rigging a bundle of slabs to a powered industrial truck using a spreader bar when a slab shifted from the spreader bar. The employee went to push the slab and was caught between the bundle of slabs and a structural support beam. The employee sustained a crush injury.

Employees were moving slabs of granite with an overhead crane and placing them on an A-frame. When the clamp released, the slabs started falling forward. The injured employee went to stop the slabs from falling and the slabs fell on top of him. The employee was crushed and sustained a head injury.

An employee was lifting a 24 x 48" tile. The employee bent down to check the pallet tag (dye lot) and felt pain in their back and shoulder. The employee was hospitalized.

An employee was using a riding lawn mower to cut the grass. They shut down the mower and climbed off to clear a jam. The employee's left little finger was partially amputated by the blade(s) still in motion.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.