MP Global Products, LLC

An employee suffered four left-hand finger amputations while performing maintenance on the rotating drum of the Opener #1 machine.

An employee was using a laminator and got a hand caught in the machine suffering third degree burns to both hands.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

At approximately 10:00 AM, employees were conducting asphalt loading operations. While securing a hose atop a truck, an employee encountered a malfunction involving a plugged hose. Pressure built up within the hose and suddenly released, causing the hose to fly off the truck. The hose contacted two employees and both employees fell approximately 7 feet. Employee 1 was on top of the truck and sustained three fractured ribs and a head contusion. Employee 1 was hospitalized. Employee 2 was climbing a ladder on the truck and sustained a fractured right leg. Employee 2 was not hospitalized.

An employee was winding a bobbin on a bobbin-winding machine when the string became entangled. While the employee was untangling it with scissors, the string caught her finger, wrapped around it tightly, and amputated it at the first joint. The machine was guarded at the time.

An employee was operating an electric pallet jack in a warehouse. As he turned out of one aisle into another, he had to reverse to get a better angle. While reversing, the pallet jack struck a metal guardrail and trapped the employee's right ankle against it. The employee's foot was broken.

An employee was checking for material flow in a screw conveyor within a material sampling port when the conveyor flight came into contact with their right hand, resulting in lacerations to their index, middle, and ring fingers.

An employee was helping to transport plastic material when their left foot was caught in the fabric cutter machine and sustained amputations to their big toe, 2nd toe, and 3rd toe. The employee was hospitalized.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.