U.S. SUGAR CORP.

An employee was changing a strainer when 180- to 190-degree sugar solution splashed from an open valve onto the employee, who suffered burns.

An employee was adjusting the flat scratcher of a sweep cultivator when the metal tube of the scratcher slid down and caught the tip of the employee's left thumb between the pipe and C-clamp. The employee sustained a left thumb tip amputation.

While performing maintenance on equipment, an employee's right pinky finger was caught between a belt and pulley resulting in a fingertip amputation.

An employee was struck by a train while driving a tractor. He was bounced around inside the cab, suffering contusions.

An employee was installing lift straps when he slipped and his hand entered the bearing point of a mill and bearing roll. His left thumb broke.

An employee was cleaning a cordless drill. As they applied brake fluid to the drill and pulled the trigger, the fluid ignited. The employee suffered burns to the face, hands, and arms.

An employee was welding on a rack when sparks ignited residual diesel on his pants. The employee sustained first-, second-, and third-degree burns.

An employee was spraying glue to the floor of an enclosed cargo trailer. The fumes made contact with the heater causing a flash fire. The employee suffered burns to their face and right hand.

An employee was replacing a valve in the gas line to the fryer. The shutoff valve malfunctioned resulting in a gas leak that then ignited. The employee sustained burns requiring hospitalization.

An employee was using a torch when a hole in the oxygen line leaked gas that then ignited. The employee sustained burns to the left palm and wrist.

An employee was adjusting the flat scratcher of a sweep cultivator when the metal tube of the scratcher slid down and caught the tip of the employee's left thumb between the pipe and C-clamp. The employee sustained a left thumb tip amputation.

A crew was building a scaffold inside a furnace. An employee was stabilizing the mudsill and jack as a 10-foot scaffold leg was being connected. The scaffold leg came in contact with the furnace wall, causing a piece of refractory brick to fall. It struck the right side of the employee's mid-back, causing a contusion.

Employees were reinstalling the frame of a mechanical guard onto a raw sugar mixer. A chain fall was used to position the frame so it's weight was resting on the lower pedestal. The chain block was then unhooked, and an employee used a hammer to position the frame so the top bolt holes would be aligned. The bottom of the frame slipped off the pedestal and the frame fell two feet down onto the employee's right arm causing fractures to the radius and ulna.

An employee was tasked with identifying a conveyor system failure. When the employee opened the conveyor, a flash fire occurred. The employee sustained burns to the hands and face and was hospitalized.

An employee was operating package filling equipment when he attempted to loosen clumped sugar in the equipment piping and injured his right hand. He was hospitalized with fractures to four fingers on his right hand.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.