Federal OSHA recorded a severe workplace injury
at Brand Energy Solutions, 1566 4th Ave South, TEXAS CITY, TEXAS 77591
on — Burns and smoke inhalation, affecting the multiple body parts, n.e.c..
Final narrative
An employee was performing gouging operations on the internal surfaces of a vessel when a flash fire occurred. The employee received burns to the upper chest, arms, and legs (approximately 44% of body) and was hospitalized for treatment of burns and smoke inhalation.
HospitalizedMultiple body parts, n.e.c.Nonclassifiable
Employees were building scaffold access under the switch deck by the coke chutes. Two employees were standing on a scaffold platform while passing scaffold material. The coke drum above them was being cut (washed down with water). Heated water left the coke drum through a chute and splashed the two employees. Both employees were hospitalized with first- and second-degree thermal burns to the shoulders and upper back.
An employee was sitting on a pipe inside a tank, sandblasting. He put his hose down to slide forward and start sandblasting another area. The hose activated and injected the back of his left leg with sandblasting medium.
An employee was prepping a blast pot for the next day and opened the top man-way. Pressure then escaped, causing the employee to be struck in the face by an unknown object. The employee sustained a laceration above his eyes and was hospitalized. The blast pot was not locked/tagged out at the time of the incident.
Employees were offloading pipe onto a pipe stand. An employee's hand was resting on the pipe stand and when the pipe came down, his hand was pinched between the pipe and the pipe stand, breaking his left index finger.
An employee was on top of a scaffold performing dry blasting operations. The employee was kneeling to reach the lower area and lost balance. The employee blasted the left hand and was hospitalized as a result of the injury.
An employee was performing oversight for the welding of a pipeline launcher door on a construction project. Two welders were performing arc welding, one on the interior diameter of the pipeline launcher door, and the other on the outside diameter of the launcher door when a flash fire occurred. The injured employee sustained first- and second-degree burns to the face, neck, back, and hands.
While on a scissor lift, an employee was grinding a steel pipe. Sparks from the grinder ignited some nearby rags that had been used to apply coating treatments to the pipe. This fire subsequently ignited the employee's clothing. The employee sustained burns to approximately 46% of their body and was hospitalized.
An employee was working in an area where another company was also working. The other company's employees were using an electric hydraulic pump to remove the bolts of the frac valve. The wiring of the torque wrench and pump unit were then charred and a flash fire occurred. The employee sustained second-degree burns to their face and neck.
On October 17, 2023, an employee was at a sink while using a solvent to unclog a vacuum trap dip tube that contained solids from pinacolborane distillation. During this process, the sink caught on fire and the solvent bottle containing tert-butyl methyl ether fell into the burning sink. The employee attempted to remove the solvent bottle which also caught on fire and suffered burns to their neck and left hand.
An employee was under a railcar cleaning up dust with a vacuum hose. The hose caused a spark that caused a flash fire that ignited the employee's clothing. The employee sustained second- and third-degree burns over 83% of his body.
More severe injuries in this industry (NAICS 213112)
An employee had been cleaning the work area. While lifting a saw, the employee's index finger was lacerated by the saw blade. A tendon was cut and required surgery.
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.
An employee was using a torch to loosen a bolt on a water trailer. Natural gas was present in the water and it ignited, causing a fire. The employee sustained third-degree burns to their upper leg.
An employee had been conducting crane operations. The employee went to stop a piece of oil and gas equipment for tubular running from falling over to the ground. Their right hand was caught between a rolling ladder and the equipment, resulting in fractures to the index and middle fingers. They were hospitalized and the middle finger required surgery.
An employee was working to install a drive belt on a water pump. He was holding the belt on both sides of the pulley, working to route it over the top. As he pulled down with his right hand, the pulley rotated and the belt slid over it, pulling his left little finger between the pulley and the belt. He suffered an amputation to the fingertip as well as a fracture to the ring finger.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.