Struck by dislodged flying object, particle · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at Brand Energy Solutions, 2502 Sheldon Road, CHANNELVIEW, TEXAS 77530
on — Cuts, lacerations, affecting the forehead.
Final narrative
An employee was prepping a blast pot for the next day and opened the top man-way. Pressure then escaped, causing the employee to be struck in the face by an unknown object. The employee sustained a laceration above his eyes and was hospitalized. The blast pot was not locked/tagged out at the time of the incident.
Employees were building scaffold access under the switch deck by the coke chutes. Two employees were standing on a scaffold platform while passing scaffold material. The coke drum above them was being cut (washed down with water). Heated water left the coke drum through a chute and splashed the two employees. Both employees were hospitalized with first- and second-degree thermal burns to the shoulders and upper back.
An employee was sitting on a pipe inside a tank, sandblasting. He put his hose down to slide forward and start sandblasting another area. The hose activated and injected the back of his left leg with sandblasting medium.
Employees were offloading pipe onto a pipe stand. An employee's hand was resting on the pipe stand and when the pipe came down, his hand was pinched between the pipe and the pipe stand, breaking his left index finger.
An employee was performing gouging operations on the internal surfaces of a vessel when a flash fire occurred. The employee received burns to the upper chest, arms, and legs (approximately 44% of body) and was hospitalized for treatment of burns and smoke inhalation.
An employee was on top of a scaffold performing dry blasting operations. The employee was kneeling to reach the lower area and lost balance. The employee blasted the left hand and was hospitalized as a result of the injury.
An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.
An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.
A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.
On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.
An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.
More severe injuries in this industry (NAICS 811310)
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
An employee was operating a lift truck when it struck a stationary lift truck. His left thumb was pinched between the two lift trucks, resulting in a partial amputation.
An employee was disassembling a pressurized unit using a driver drill. When the unit was disassembled, it caused a kickback from the tube head, causing the drill to strike the employee's left forearm. They sustained a diaphyseal fracture to their left radius and ulna, which required surgery.
After repairing a piece of industrial equipment, an employee had brake-cleaning liquid on his gloves. A lighter ignited the liquid, and the employee's hands were severely burned.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.