HOLLAND MANUFACTURING CO., INC.

An employee was operating a clamp truck to transport material to a workstation from the rear of the warehouse. The forklift was traveling near the rear baler area when another employee stepped into its path and the front right tire ran over his left foot. Their left foot and toes were crushed resulting in a dislocation and broken bones, as well as a laceration to the foot.

Hot laminate splashed onto the back of an employee's head, arm, and hand.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was clearing a clog in the glue gun machine. When the clog cleared, his left index finger struck the fan blade, resulting in medical amputation.

An employee was operating a clamp truck to transport material to a workstation from the rear of the warehouse. The forklift was traveling near the rear baler area when another employee stepped into its path and the front right tire ran over his left foot. Their left foot and toes were crushed resulting in a dislocation and broken bones, as well as a laceration to the foot.

An employee was grinding a burr off a piece of stainless steel using a 12-inch stationary disc sander when his right thumb contacted the sanding disc, resulting in amputation at the first knuckle.

On February 16, 2023, an employee was removing a piece of film from a machine when his right thumb was pulled into the nip-point and amputated.

On December 16, 2022, an employee was feeding a book through a machine and guiding the wire when their left index finger was amputated at the first knuckle.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.