Printpack, Inc.

A maintenance employee was using a rubber roll grinding lathe to resurface a rubber roller/sleeve. The lathe has a grinding wheel attached to it which passes across the roller to remove a fine layer of rubber from the roller to remove any blemishes that would affect the printing process when it is placed back into a printing press. When the employee went to wipe the rubber dust away from the roller/sleeve their right ring finger contacted the grinding wheel at the end of the lathe. The employee sustained an open fracture of the distal phalanx of the right ring finger resulting in a surgical, partial amputation and a laceration to the little finger with damage to the nail.

An employee was using a rag and solvent to clean a chrome roller when their right hand was pulled into a nip point created by the drive roller and the chrome roller resulting in contusions and swelling.

A pallet had been loaded onto a trolley to be picked up for wrapping, but a broken bottom board on the pallet was blocking an entry roller sensor, tripping it and preventing the trolley from moving. An employee removed the board and the trolley began to travel. Her left knee and thigh were lodged between the framing of the trolley and a stationary pallet insert line. She suffered a laceration to the back of the thigh.

An employee was moving a manlift onto a freight elevator when it fell onto his left leg resulting in a compound fracture.

An employee was unloading a trailer on the dock when he was struck by a forklift truck and pinned between the forklift and the overhead door, breaking his knee and suffering cuts and an abrasion.

On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.

An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.

An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.

An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.

An employee's right hand was caught in a wire drawing machine, resulting in amputation.

An employee was clearing a clog in the glue gun machine. When the clog cleared, his left index finger struck the fan blade, resulting in medical amputation.

An employee was operating a clamp truck to transport material to a workstation from the rear of the warehouse. The forklift was traveling near the rear baler area when another employee stepped into its path and the front right tire ran over his left foot. Their left foot and toes were crushed resulting in a dislocation and broken bones, as well as a laceration to the foot.

An employee was grinding a burr off a piece of stainless steel using a 12-inch stationary disc sander when his right thumb contacted the sanding disc, resulting in amputation at the first knuckle.

On December 16, 2022, an employee was feeding a book through a machine and guiding the wire when their left index finger was amputated at the first knuckle.

Employees were working to install a hydraulic cylinder into a press. A forklift was being used to lift the cylinder. The injured employee was guiding the cylinder to a pallet when the straps flipped and the cylinder dropped onto the pallet and the employee's right foot. The employee sustained a foot injury.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.