105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

MAPEI CORPORATION

Compressed or pinched by shifting objects or equipment · Amputations

Federal OSHA recorded a severe workplace injury at MAPEI CORPORATION, 1501 Wall St , GARLAND, TEXAS 75041 on — Amputations, affecting the finger(s), fingernail(s), unspecified.

An employee was fixing a boomerang machine caster. A support fell and pinched the employee's right index finger between the floor and the machine resulting in an amputation injury.

Amputation Finger(s), fingernail(s), unspecified Machinery, unspecified

Mapei Corporation

A panel was being lifted when an attached roller (approximately 20 pounds) slipped and fell about 2 feet onto the hard hat of an employee working below. The roller also struck the employee's shoulder and back. The employee was hospitalized and suffered a contusion to the shoulder/back.

MAPEI CORPORATION

An employee was sanding a piece of metal on a belt sander when his gloved hand was caught between the belt and the piece being sanded. The employee sustained a partial amputation to their right index finger.

MAPEI CORPORATION

At 7:30 p.m. on January 28, 2021, an employee was sitting in his vehicle in a company parking lot when he was shot in the face with a shotgun through the driver's side window. He was hospitalized, undergoing surgery.

MAPEI CORPORATION

Employees were in the process of draining material from a mixer through its pneumatically actuated ball valve, which is approximately 3 inches in size and located at the bottom of the mixer. The ball valve was actuated, but material did not flow. The injured employee was trying to un-clog the ball valve when it actuated and amputated the employee's left middle fingertip.

Mapei Corporation

On March 31, 2016, an employee experienced the amputation of the left middle fingertip when it was caught between a conveyor belt and a pallet. The employee was hospitalized for surgery.

View MAPEI CORPORATION's full OSHA safety record →

TForce Freight

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

Liveo Research, Inc.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

Best Pump and Flow

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

FORD MOTOR COMPANY

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

Lasseter Tractor Company. Inc.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

Concrete Sealants Inc

An employee was rolling up sheets of sealant using a rotating mandrel when her right hand was caught in the mandrel. Her right arm was pulled into the roll of material. The employee was hospitalized with three fractures to her right arm.

POLYMER ADHESIVES

An employee worked a full shift and later started cramping up due to exposure to heat and high humidity. The employee was hospitalized with heat exhaustion.

DAP Global Inc.

At 2:05 p.m., the injured employee was shadowing another operator. They went into the aerosol gashouse as part of training. As they entered, the self-closing overhead door shut while the injured employee's right hand was still on the edge. The employee's little fingertip was caught and partially amputated between the door and the frame.

SIKA CORPORATION

An employee fell from the top of a fixed ladder, passing through the ladder's access opening and landing on the floor about 6-7 feet below. He suffered nine broken ribs (four on the left side and five on the right), as well as a punctured lung. He was hospitalized.

Sika Corporation

On April 8, 2025, an employee was unjamming a conveyor belt. It reactivated, and his right little finger was caught between the belt and a conveyor roller. He suffered a partial amputation of the fingertip.

T G Meat Center LLC

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

Professional Flooring Supply

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

EnviroSafe Demil LLC

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

Inteplast Group

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

Regency IHS of Fairwinds Halletsville, LLC

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.