Fagen, Inc.

At a construction site, an employee was moving flooring and grating by hand when their left little fingertip was amputated by grating.

An employee had rigged slings and shackles to a 419-pound fan silencer and communicated to the crane operator via radio to cable up. A coworker was helping stabilize the silencer because it was upside down in the shipping crate. While trying to stabilize it, an employee's fingers were caught between the silencer leg and the ground. His left index fingertip was crushed and had to be amputated, and his left middle finger was lacerated.

An employee was delivering mail when they tripped on a curb and fell to the ground, resulting in a kneecap injury.

An employee was leaving work when they tripped over a curb in the parking lot and fell into a wall, resulting in a fractured left humerus.

A nurse was visiting the home of a patient for requested treatment. She tripped on her gown while going up the steps to the property, falling and fracturing her left femur.

An employee tripped on a step while entering a house. The employee suffered a broken right femur and was hospitalized, requiring surgery.

An employee was walking up an escalator that was out of service when they tripped on a step, fell, and suffered a closed fracture to the right femur as well as a dislocated right patella.

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

An employee was ascending the wind tower when their right arm was caught between the lift and the ladder. The employee sustained a right elbow injury and was hospitalized.

On 3/27/2025, at 9:57 AM, an employee was performing switching work including installing electrical grounds when an arc flash occurred. Personal protective equipment (PPE) was worn at the time, including an arc flash hood, shirt, and pants. The employee suffered burns and was hospitalized.

An employee was cleaning dirt out of a contactor using a hand-held blower and contact cleaner. An arc flash occurred, and the employee sustained burns to the right side of their face and both hands.

On February 16, 2025, an employee was descending a ladder on the third deck after completing rigging at a wind farm. Their left foot slipped on the penultimate rung and their leg became wedged between the ladder rungs and a horizontal bracket. The employee then landed on the second deck resting platform, resulting in a leg fracture above the ankle.

An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.