Reynolds Consumer Products

An engineering technician was testing an electrical panel when an arc flash occurred, resulting in burns to the arm and hand.

An employee was attempting to thread a machine and position the zipper when the machine's roller amputated her fingertip.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

A maintenance technician was investigating a tool issue. He was pressing the tool clamp/unclamp button with his right hand when his hand slipped off the button, causing the spindle to clamp on his distal left index finger, resulting in amputation.

An employee had just fixed a loose aluminum coil on a rack while raised about 11 feet into the air on a forklift. While he was being lowered, he fell from the forks to the floor, suffering two fractured ribs, a punctured lung, and a fractured cervical vertebra. He was hospitalized.

An employee was troubleshooting a caster machine. While removing a cap cover, the catch pan moved up and caught his right arm against the caster blocks. He suffered lacerations and an open break of the ulna. He was hospitalized.

At 11:27 a.m. on March 15, 2025, an employee was transferring film to start a new roll when the winder shaft failed to seat properly in its cradle. The employee was knocking the unseated shaft down when his right thumb was caught. The employee sustained an amputation to right thumb.

Two employees were riding in a utility terrain vehicle down a loose gravel path. The vehicle's front wheel dug into the gravel, and it rolled over onto its side. The injured employee struck the interior of the vehicle (including the steering wheel) before landing on the driver. The injured employee suffered a 6-inch head laceration, a broken collarbone, and six broken ribs.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.