Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Kerry Ingredients and Flavours, Inc, 160 Terminal Ave, CLARK, NEW JERSEY 07066
on — Heat (thermal) burns, unspecified, affecting the upper extremities, unspecified.
Final narrative
An employee was restarting a machine while standing in front of the vent of the RTO and was burned on his upper extremities.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 311942)
An employee was transferring scrap metal from a tote into a metal recycling dumpster for disposal. While throwing a 20-pound stainless steel motor into the dumpster, the employee moved in closer to ensure it went inside. As they tossed the motor, it appeared to be off-target, so they went to push and redirect it while it was in the air. During this action, their right ring and little fingers were caught between the falling motor and the edge of the dumpster. The employee suffered a crush injury to the ring finger and an amputation of the little finger above the top knuckle.
An employee was cleaning a piece of machinery when the tool they were using became lodged in the running machine. The force of the tool becoming lodged fractured their left forearm.
An employee was driving a stand-up forklift into a truck trailer at a loading dock. The dock plate and the truck separated, and the forklift fell to the ground. The employee's left foot was caught and broken between the dock plate and the forklift; the employee was hospitalized, requiring surgery.
An employee was sweeping the platform area around a dumpster and began walking down stairs when he fell to the last step, resulting in a right shoulder injury. The employee was hospitalized.
On January 29, 2025, an employee was working to remove a piece of debris on a bag sealing machine. The employee's finger was pulled through a pulley by a moving belt behind the guard, resulting in a fingertip amputation.
An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.
An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.
An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.