Exposure to environmental heat · Effects of heat and light, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at AAF International, 2355 S Armstrong Ave, FAYETTEVILLE, ARKANSAS 72701
on — Effects of heat and light, unspecified, affecting the bODY SYSTEMS.
Final narrative
An employee was moving a free rolling blanket cart when he stopped and grabbed his chest. He sat down on the blanket cart and complained about chest pain. Temperature in the area ranged from 90 to 100 degrees. The employee was admitted to the hospital.
A temporary employee was attempting to place an empty bin under a shredder. The bin was not in alignment so two co-workers pushed the bin forward while the injured employee guided it through. The injured employee's right thumb was pinched between the bin and the shredder frame. The employee was hospitalized for an open fracture of the right thumb.
An employee was testing jig operations at the beginning of his shift. After a cycle did not complete properly, he reached to adjust the jig. The jig cycled another 1/2 inch causing the partial amputation of his left middle finger.
On 11/22/16, an employee was cleaning a glue roller with a scraper when the employee's right-hand middle finger was caught between glue rollers. The fingertip had to be surgically amputated.
An employee was performing finishing work on a residential driveway when they began to experience body cramps and were hospitalized for heat stress and dehydration.
An agent was participating in SWAT team selection and was performing various physical fitness skills including running and exercise intervals. The agent experienced dehydration and a muscular injury that required hospitalization.
On September 26, 2023, an employee was delivering packages when he began to feel ill with a pain in his side. He was hospitalized for heat exhaustion and dehydration.
More severe injuries in this industry (NAICS 327215)
An employee was operating a machine and went to remove a buildup of desiccant from the machine. Their right index finger was pinched between two moving parts, resulting in an amputation to the finger.
On September 3, 2025, an employee was working on the left-side charger of a tank. They were using a ratchet with an extension to make an adjustment to the sand seal when their right thumb was pinched between the ratchet and the running charger, resulting in an amputation at the first knuckle.
A forklift was placing an elevated load onto a truck. The forklift tipped forward and fell on the injured employee who was standing nearby. The employee sustained fractures to their hip and ribs, as well as leg muscle injuries.
At 12:09 p.m. on July 11, 2025, an employee was inspecting the dust collection system in a plant. The employee was checking an airlock to determine whether there was suction when their left index and middle fingers were pinched between the rotating rotor and the housing of the airlock. The employee suffered amputations of both fingertips without bone loss.
An employee was manually removing a bearing from a vertical washer brush. Due to the weight of the brush roll, it released and crushed his left ring fingertip resulting in amputation without bone loss.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.