Southern Bakeries LLC

An employee was replacing the belt on the blower motor of a flour silo when the motor energized and amputated the left middle fingertip.

Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.

An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.

An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.

An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.

An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.

An employee was operating a stretch wrap machine in the packaging area when his little finger was caught in the machine's chain mechanism. He sustained a fracture to the tuft of the finger and was hospitalized. The machine was unguarded at the time of the incident.

On August 12, 2025, an employee was performing maintenance on a motor and suffered an amputation to the left index fingertip, as well as a laceration to the left middle finger.

An employee was performing sanitation tasks and adjusting a valve by tapping it with a rubber mallet. The valve came apart and the employee was sprayed with 180-190-degree water. He was hospitalized with thermal burns to multiple parts of the body.

An employee was cleaning the rice cake machine. He then went to move the machine when it caught and amputated his thumb.

An employee was cleaning ovens from a three-step ladder. The ladder slipped, causing employee to lose balance and fall to the floor, suffering a broken left leg.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.