RIVER VALLEY ANIMAL FOODS - TYSON FOODS, INC.

The employee was on top of a rail car to level the grain that was deposited into the car when they fell 13-15 feet to the ground. The employee sustained a right leg fracture.

An employee was on an extension ladder installing a satellite dish on a roof when they fell approximately 12-15 feet to the ground. The employee sustained fractures.

An employee was setting a 5-foot pry bar into a precast concrete slab and stood on the end of the pry bar to move the slab into place. The pry bar slipped out causing the employee to fall backward 15.5 feet to the dirt ground. The employee was hospitalized with a broken leg.

An employee was on a step ladder to measure and mark a crane rail for modification. The employee fell approximately 12 to 15 feet to the ground, resulting in a fractured right hip.

An employee was on a trailer securing a load of logs when they fell approximately 9-12 feet to the ground. The employee sustained brain hemorrhaging and lacerations to the thigh and above the eye. The employee was hospitalized.

A temporary employee was working to unclog butter from a butter melter pump. His right index finger was caught in the machine, and the fingertip was amputated. The machine was energized at the time.

An employee working at the reject conveyor was placing a product guide bar on the conveyor. This metal guide bar is placed on the side of the conveyor belt to funnel the product, preventing it from falling off the sides. As he was getting the attachment positioned, his left ring finger was caught between the conveyor belt and the conveyor belt frame. The employee's finger was fractured and partially amputated.

An employee was using a pneumatic impact wrench to tighten bolts on a brake press anvil. The impact wrench hooked up on something, causing the tool to rotate. This spun his left hand with it. Their index finger was pinched between the side handle of the tool and an anvil bolt on the press, resulting in an open fracture. The employee required a medical amputation of the fingertip.

An employee was cleaning the area under a mobile elevated work platform. The platform lowered and struck the employee, resulting in a fractured right femur. The employee was hospitalized.

As an employee was opening an infeed valve. Hot tallow oil in the line above fell back down the pipe and came out of an open pressure relief valve, striking the employee on the thighs. The employee was hospitalized with second-degree burns to his thigh. Another employee sustained burns to their back but they were not hospitalized.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.