Konecranes, Inc.

An employee was removing metal bar stock from cantilever racking using an overhead crane. The metal bar stock dropped onto the employee's right middle finger causing an amputation.

An employee was performing maintenance on a hoist that was on a mill roof when the employee fell approximately 14 feet through a roof opening to the floor below, suffering a broken right elbow, broken right pelvis, and head trauma.

An employee was preparing to remove a hook/bottom block from an under-the-hook lifting device when the crane hook latch partially amputated the employee's right thumb.

On or about August 3, 2015, an employee was struck by a man lift while walking down an aisle.

Two employees were attempting to lubricate pinion gears on an overhead crane bridge drive. To prevent overspray, the first employee held a blue shop rag behind the pinion gear being lubricated. The second employee sprayed the lubricant. The first employee asked the second to move the bridge forward using the crane pendent control, so he could lubricate the entire gear. The second employee inched the crane forward, at which time the blue shop rag and the first employee's finger got pinched between the pinion gear and the drive wheel.

The employee was on top of a rail car to level the grain that was deposited into the car when they fell 13-15 feet to the ground. The employee sustained a right leg fracture.

An employee was on an extension ladder installing a satellite dish on a roof when they fell approximately 12-15 feet to the ground. The employee sustained fractures.

An employee was setting a 5-foot pry bar into a precast concrete slab and stood on the end of the pry bar to move the slab into place. The pry bar slipped out causing the employee to fall backward 15.5 feet to the dirt ground. The employee was hospitalized with a broken leg.

An employee was on a trailer securing a load of logs when they fell approximately 9-12 feet to the ground. The employee sustained brain hemorrhaging and lacerations to the thigh and above the eye. The employee was hospitalized.

On December 11, 2023, an employee was on an elevated platform, loading cargo containers onto an aircraft. As he was trying to adjust the platform and/or move bags, he lost his balance and fell from the platform to the ground 10-12 feet below. He suffered broken ribs, a broken wrist, and a dislocated hip.

Employees were building a gantry. The injured employee was carrying part of the gantry when their left ring finger was crushed between the gantry and wood. The employee's fingertip was amputated.

A crane operator slipped and fell while getting out of his crane, landing on the ground and rendering him unconscious. The employee was hospitalized.

A civilian vehicle entered the construction site to avoid a motor vehicle accident and struck two employees who were cleaning up the area. The two employees sustained injuries and were hospitalized.

An employee was assisting the drill rig operator when his left little finger was crushed by the Kelly bar, resulting in amputation of the finger.

An employee was removing a blade that was lodged in a pipe when their foot was caught by the cold cutter blade attachment. The employee sustained a crush/laceration injury to three toes on the right foot. The employee was hospitalized.

An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.

An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.

An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.

An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.

An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.