Great Lakes Dredge & Dock Company, LLC.

An employee was operating a winch on a barge when the rigging came free and hit the protective cage, breaking the cage loose. The cage hit the employee, lacerating his forehead and causing multiple facial fractures. The was hospitalized.

An employee was assisting with loading product (sacks of dirt) onto a barge. The sack of dirt swung and pinched the employee between it and other sets of product on the barge. The employee suffered a neck compression injury and was knocked unconscious.

An employee was on a barge adjacent to a lift that was being tested. As the load was lowered, a nylon stiffener broke free from existing structural steel and fell 80 feet, striking the employee in the right forearm. The employee sustained two broken bones in the forearm.

An employee was offloading cargo from the hatch of a motor vessel onto a dock when the cargo (bagged cement) struck the employee and caused them to contact a nearby hatch wall. The employee sustained injuries to their neck, right lower back and right leg.

An employee was walking across the barge when they stepped across a barge gunnel lid that was hidden due to coal spillage. The lid came up and struck the employee, resulting in abdominal bruising.

An employee was climbing up an A-frame ladder to gain overhead access to install ship ventilation equipment. The employee's safety glasses bumped the sprinkler head diffuser, which knocked his glasses off and caused a laceration to his left lower eyelid and an injury to the sclera.

A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.

Employees were securing the fuel line of an outboard motor in preparation for removing the motor from a small vessel located in the equipment yard. A gasoline-related fire occurred and one employee sustained burns to both hands and forearms.

A marine diver/construction worker was working underwater, using a hydraulic dredge to clear sediment away from the base of a dam. The dredge's suction nozzle began migrating toward him, and then pulled in his right hand and forearm. He sustained compartment syndrome in the hand and forearm.

An employee was standing on a sheet of -inch by 4-foot by 8-foot plywood on top of a rebar mat, supervising his crew. As he was moving to alert the crew to an incoming overhead load, he stepped off the plywood and his left foot slipped through the rebar mat and landed on the rebar mat below. His left ankle was broken and dislocated.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.