105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Atwood Distributing, LP

Other fall to lower level less than 6 feet · Fractures

Federal OSHA recorded a severe workplace injury at Atwood Distributing, LP, 1700 East First Street, CHANDLER, OKLAHOMA 74834 on — Fractures, affecting the knee(s).

An employee slipped and fell from a step stool while stocking merchandise, fracturing the right knee.

Hospitalized Knee(s) Step ladders

Atwood Distributing, LP

An employee was walking in the feed area to retrieve straps when he stepped over a pallet and tripped over the cardboard. He fell to the ground on his left left hip and fractured it.

Atwood Distributing LP

An employee was going outside to check a water pump after a rain storm. The ground was wet from both the rain and oil that had spilled from a cracked bucket; he slipped, fell to the ground, and suffered a broken left hip. He was hospitalized.

Atwood Distributing, LP

An employee was pulling on the handle of a pallet jack that was stuck on a pallet. When the pallet jack came unstuck, it caused the employee to fall backward and fracture his right hip on the ground.

Atwood Distributing LP

An employee was opening freight boxes with a pocket knife when the knife slipped and contacted their index finger, resulting in amputation of the finger pad.

Atwood Distributing, LP

An employee was standing on a bale of hay to pull a separate bale of hay from the top of a semi-truck bed for a customer. The bales of hay were held together by metal baling wire. When the employee went to undo the bale, the metal baling wire broke, causing him to fall off the hay bale and land on his left hip. The employee suffered a broken left hip.

View Atwood Distributing, LP's full OSHA safety record →

Electrical Contractors Inc.

An employee was climbing a step ladder while carrying a 3-foot piece of conduit. As he went to reposition his feet on the ladder by pivoting, he slipped and fell from the third rung of a 6-foot ladder. The employee sustained fractures to the left femur, right elbow, and right ring finger.

M1 Support Services

An employee was descending a 4-step maintenance stand when she missed the bottom step and fell to the hangar floor. The employee suffered a left hip fracture.

FEDEX Ground Package System, Inc.

An employee stopped a belt and was going to check it for missing packages. She fell backward 3-4 feet from an elevated platform and sustained a broken right arm.

SRM Concrete

An employee had just finished a routine concrete pour and was ascending the ladder to clean the concrete mixer truck. The employee lost their grip and fell approximately 2-3 feet, contacting the truck's bumper. The employee suffered rib fractures and a punctured lung.

U.S. Postal Service - Los Angeles P&DC

An employee was performing duties as an expeditor. After opening the dock door, the employee scanned the barcode on the door of the truck and placed one foot on the truck and one foot on the dock. The truck drove out of the stall, causing the employee to fall 4 feet off the dock onto the concrete. The employee sustained fractures to the right side of the pelvis, elbow, and a left ring fingertip as well as injuries to the right wrist and bruising to the back and stomach.

Certain Teed Insulation Athens

An employee was working to unjam an auger screw. The screw caught his glove, resulting in a severe open fracture to his left lower forearm. He was hospitalized, requiring surgery.

Walmart Distribution Center #6069

An employee was working in a warehouse without air conditioning on a day when the temperature outside was in the 90s. The employee developed heat stress, became ill, and was hospitalized.

Royal Oaks Enterprises LLC

An employee was walking in the middle of the track during heavy rain when he slipped on a rail transition and fell, hitting his arm on the rail. The employee was hospitalized with a fractured left arm.

F.C. Ziegler Company

An employee was scraping down the sides of a mixing machine. The machine activated and her right arm was caught in the auger, resulting in a fractured lower arm.

Elmet Technologies (formerly H.C. Starck Solutions - Euclid)

Two employees were conducting a roll change on a rolling mill machine using a porter bar and a counterweight sleeve. The sleeve slid back and crushed the injured employee's right index fingertip between the sleeve and the counterweight, resulting in a partial amputation.

Rae Corporation

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

Meeco Sullivan

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

Edward Jones Investments

An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.

Burgess Manufacturing of Oklahoma Inc.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.