EMPORIA, KANSAS—
S&S Quality Meats LLC
Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at S&S Quality Meats LLC, 1542 S Hwy 99, EMPORIA, KANSAS 66801 on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was using a meat grinder when some meat became stuck to the side of the hopper. When the employee went to dislodge the meat, the employee's left hand was caught in the auger, amputating the pinky fingertip and ring finger.
Similar incidents · Same event type
CHICAGO, ILLINOIS—
DGS Import, LLC
An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.
SUWANEE, GEORGIA—
Millennium Mat Company
An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.
TAMPA, FLORIDA—
Bauer Foundation Corp.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
SUGARCREEK, OHIO—
Guggisberg Cheese, Inc.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
HOUSTON, TEXAS—
Alsco Inc.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 311613)
MUNDELEIN, ILLINOIS—
Ruprecht Company dba Kilcoy Global Foods
A temporary employee was working to unclog butter from a butter melter pump. His right index finger was caught in the machine, and the fingertip was amputated. The machine was energized at the time.
GAINESVILLE, GEORGIA—
Fieldale Farms Corporation
An employee working at the reject conveyor was placing a product guide bar on the conveyor. This metal guide bar is placed on the side of the conveyor belt to funnel the product, preventing it from falling off the sides. As he was getting the attachment positioned, his left ring finger was caught between the conveyor belt and the conveyor belt frame. The employee's finger was fractured and partially amputated.
FREEMAN, SOUTH DAKOTA—
Dakota Protein Solutions, LLC
An employee was using a pneumatic impact wrench to tighten bolts on a brake press anvil. The impact wrench hooked up on something, causing the tool to rotate. This spun his left hand with it. Their index finger was pinched between the side handle of the tool and an anvil bolt on the press, resulting in an open fracture. The employee required a medical amputation of the fingertip.
JEROME, IDAHO—
True West Beef
An employee was cleaning the area under a mobile elevated work platform. The platform lowered and struck the employee, resulting in a fractured right femur. The employee was hospitalized.
GREEN BAY, WISCONSIN—
Sanimax USA LLC
As an employee was opening an infeed valve. Hot tallow oil in the line above fell back down the pipe and came out of an open pressure relief valve, striking the employee on the thighs. The employee was hospitalized with second-degree burns to his thigh. Another employee sustained burns to their back but they were not hospitalized.
More severe injuries in KANSAS
WATHENA, KANSAS—
Omya Inc.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
COFFEYVILLE, KANSAS—
John Deere Coffeyville Works
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
HAVEN, KANSAS—
Haven Steel Products Inc
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
MINNEOLA, KANSAS—
Vestas-American Wind Tech
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
MEADE, KANSAS—
Alliance Ag and Grain LLC
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.