County Materials Corp.

An employee was measuring the elongation of a pre-stress cable strand. The strand failed under tension and hit the employee's right arm and hand. The hand was injured and two fingers were fractured.

An employee was closing the security gate to the yard at the end of his shift when his left ring finger contacted the roller on the upper rail of the gate, resulting in a fingertip amputation near the nail bed.

An employee had been removing formwork to set up for a different job and was struck by the concrete formwork and sustained a broken pelvis requiring hospitalization.

An employee was guiding a hydraulic cylinder ram into its storage rack while it was supported by a small jib crane. As he was guiding the cylinder, the ram slowly retracted. The head of the ram then pinched the employee's finger against the bolt and the frame, crushing and partially amputating his right index finger.

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

On September 30, 2025, an employee was applying production labels to a splintered piece of pallet on a conveyor. Their right middle finger was caught as the split line exit conveyor moved forward, resulting in an amputation.

An employee was operating a pattern block roller machine. The employee was pinned (at the mid- to upper torso) between the pusher bar and the assembly platform. The employee suffered broken ribs.

Employees were chipping concrete/brick to separate a building for demolition when the wall collapsed and debris fell onto the employees, resulting in hospitalization of two employees. One employee sustained a fractured left femur and a head injury, and the other sustained a severe head injury.

An employee was adjusting a paint roller when his left ring finger was caught in a chain and sprocket. The fingertip was amputated.

An employee fell while walking down the stairs. They were hospitalized with a fractured left ankle.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.