105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Andritz Separation, Inc.

Struck by object falling from vehicle or machinery-other than vehicle part · Fractures and other injuries, unspecified

Federal OSHA recorded a severe workplace injury at Andritz Separation, Inc., 123 Erskine Lane, SCOTT DEPOT, WEST VIRGINIA 25560 on — Fractures and other injuries, unspecified, affecting the multiple body parts, unspecified.

On November 22, 2016, at approximately 8:00 a.m., an employee was using a floor-operated overhead crane to lift a gear unit. The fine thread eye bolts that secured the load to the chain sling became stripped and allowed the load to fall onto the employee, causing a fracture and nerve/artery damage.

Hospitalized Multiple body parts, unspecified Parts and materials, unspecified

ANDRITZ SEPARATION, INC.

An employee was cutting a brass punch on the band saw. When the employee went to clamp the brass part, the part moved causing the clamp to crush the end of their right middle finger and it amputated the finger between the first knuckle and the fingernail.

Andritz Separation Inc.

An employee was struck by a centrifuge engine, knocked off by a top shelf by slack in a crane cord. The employee suffered broken vertebrae and lacerations to the head and neck.

ANDRITZ SEPARATION, INC.

An employee was lifting a piece of machinery with a crane when the load slipped and his left index finger was pinched between the beam on the crane and the load. He was hospitalized and his left index fingertip was amputated.

View Andritz Separation, Inc.'s full OSHA safety record →

Star Pipe Products LTD

An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.

KP Building Products, Inc.

An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.

BJ'S WHOLESALE CLUB, INC.

An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.

International Steel and Counterweights LLC

An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.

Seneca Mechanical, LLC

An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.

UPS Industrial Services, LLC

An employee was positioning dunnage on a trailer while pipe was unloaded from a forklift. A pipe fell and the employee's right thumb and index finger were caught between the pipe and a piece of dunnage. The thumb was crushed, and the index fingertip was amputated.

Phoenix Tube Company, Inc.

An employee was using a lifting sling on a crane to move a straight-bar bundle and place it on top of an existing bundle. When moving the lifting sling, it became pinched between the bundle and a wood cleat. The bundle then fell onto the employee's left foot, resulting in crush injuries.

Kopco, Inc

An employee was stacking metal tubes using a forklift. A stack became unstable and the employee got out of the forklift to steady it, instructing his helper to get into the forklift. The forklift movement caused some tubes to fall and strike the employee, resulting in an open fracture of his left hand.

Wilson Machine & Welding, Inc.

An employee was setting up a flexible gear coupling hub in a lathe, preparing to bore it out to fit a shaft. The hub assembly was not secured in the chuck when the crane support was removed, and the employee's right little finger was caught between the hub assembly and the inside of the lathe. The fingertip was amputated.

D & J MACHINERY, INC.

An employee was using a crowbar to loosen a flat bar when the crowbar struck the employee's right eye. The employee was hospitalized and required surgery.

Caperton Furniture Works, LLC

An employee tripped over a concrete curb stop in a parking lot. The employee fell to the ground, landing on their left hip and breaking it.

Certainteed Gypsum West Virginia, Inc

An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.

Owens Corning

An employee was climbing down a ladder when it slipped. The employee fell, suffering a broken scapula and broken ribs. The employee was hospitalized.

Applied Integrated Services, LLC

An employee was climbing down a 15-foot multipurpose ladder. The employee fell about 8 feet, landing on the concrete floor and the ladder itself. The employee suffered several injuries, all on the right side: broken ribs, a broken sternum, a broken temporal bone, broken shoulder, multiple fractures to the cheekbone, and a brain bleed.

Fedex Freight Inc.

An employee was rolling up the landing gear on his trailer when the handle began to unwind and struck his face, fracturing his jaw. The employee was hospitalized and required surgery.