Struck by falling object or equipment, unspecified · Fractures (except skull fractures) and concussions
At a glance
Federal OSHA recorded a severe workplace injury
at Minteq International, Inc., 77 Daisy Hill Road, NORTH CANAAN, CONNECTICUT 06018
on — Fractures (except skull fractures) and concussions , affecting the multiple body parts, n.e.c..
Final narrative
An employee was removing a 700 lb. flange from the side of a winder coil of wire when the flange released and fell on the employee. The employee suffered a mild concussion, broken arm, and fractured L2 vertebra, requiring hospitalization and surgery.
HospitalizedMultiple body parts, n.e.c.Fasteners, connectors, ropes, ties, n.e.c.
More severe injuries at Minteq International, Inc.
An employee was cleaning the floor by a belt conveyor when their right arm contacted the pulley/belting. His arm was pulled into the conveyor assembly, resulting in a fracture to his upper arm.
An employee was working on a ladder resting on a wooden plywood platform. As the employee was climbing down the platform, the plywood came loose and broke. The employee then fell 6 feet off the ladder and broke an ankle.
An employee was unloading 30-foot 2-inch barrels from a pan holding about 20 barrels. The barrels tipped over, striking and breaking both of the employee's lower legs.
An employee was in a sandblasting area, preparing the surface of a plate heat exchanger frame for painting. The frame fell on the employee, who suffered fractures to vertebrae, the neck, pelvis, and rib cage; and punctured lungs.
An employee was changing a section of pipe on a sulfuric acid tank when the pipe broke and acid splashed onto the left side of the employee's body, resulting in chemical burns to their left shoulder, the back of his arm, and his leg.
On August 1, 2025, at approximately 5:05 AM, an employee was applying a label to a spool of product on a crane when the employee s arm became caught between two points of the crane. The employee was hospitalized with a degloving/avulsion injury to their right arm.
An employee was making an adjustment to a machine when his finger got caught in the machine. He sustained a partial amputation to the fifth finger on his left hand.
An employee was working on a wire drawing machine when three fingers on their right hand were caught between the rolls with the wire intact. The employee sustained an amputation to the middle and ring fingers and was hospitalized.
An employee was working at a threader machine. A spindle caught her sweatshirt. She was pulled into the machine, which pulled off her hooded sweatshirt and pulled in her hair. She suffered a scalping and was hospitalized.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.