Machinery or equipment incident on water vehicle · Swelling, inflammation, irritation-nonspecified injury
At a glance
Federal OSHA recorded a severe workplace injury
at Washington Marine Cleaning LLC, 1801 16th Ave. SW, SEATTLE, WASHINGTON 98134
on — Swelling, inflammation, irritation-nonspecified injury, affecting the eye(s).
Final narrative
An employee was working on the compressed air line for a vessel and connecting a 2-inch hose to a valve in a bilge in order to flush a new pipe. He then stepped on the valve, which opened and released air that knocked off his safety glasses and blew metal debris into his eye. He was hospitalized.
Employees were unloading logs on a logging vessel. The injured employee was standing on the deck as a load came in. The sling popped off the load and the end of the choker struck the employee's lower left leg, resulting in a shin fracture.
An employee was exiting a confined space while carrying a pressure gun when the trigger activated. Water penetrated the employee's left arm, resulting in injury.
The employee was putting shackles on the grab of a vessel-operated crane. As the crane was lifting the grab, it started to swing toward the hopper. The employee reached to stop it when they were caught and lifted by the grab and pinned between it and the hopper. The employee sustained a pelvic fracture and lacerations to the arm and pelvis.
An employee was launching a boat during rough sea conditions. The employee lost balance, causing their left index and middle fingertips to be caught in the eye of the bow line, resulting in amputation.
Two employees were in a boat pulling a 45-pound anchor out of the water by the rope. The rope tightened and as the employees were attempting to create slack in the rope, the injured employee began to slip. His hand was caught between the rope and the inside of the platform boat, resulting in amputation of the right middle finger with bone loss.
More severe injuries in this industry (NAICS 488390)
An employee was securing a power cord to a refrigerated truck container. A truck started backing up to connect with the container and the employee was pinned between the tires of the container and the bolster of the truck, resulting in a fractured leg.
An employee was exiting a tank barge's cargo tank after pressure-washing its inside. He was resting at the top of the fixed ladder, with his upper body out of the tank hatch, when he collapsed and fell about 13 feet into the cargo tank. The employee sustained a fractured spine requiring surgery. The employee hospitalized.
An employee was using a pocket knife to cut a zip tie that was holding the slacked portion of line on a ratchet strap. The ratchet strap opened unexpectedly, causing the employee to lacerate an artery in his left forearm. The employee was hospitalized and required surgery.
An employee was walking across a catwalk on a vessel. The employee slipped and fell, striking their right side on the catwalk and suffered broken ribs on that side. The employee was hospitalized.
An employee was spray painting an area of a marine barge using a pressurized paint gun. Her glove became stuck to the gun. Her left hand came out of the glove and while trying to adjust the gun, paint was injected into her left middle finger.
An employee was drilling a hole into the sealed hold of a vessel so a marine chemist could test its atmosphere. Upon drilling the hole, a gas that was under pressure was released and caught fire at the drill motor, where the employee was holding it. The employee was burned.
An employee was performing restoration activities outside a 45-gallon condensation tank of a boiler system. As they were performing post-maintenance activities after repairing one of the two discharge pumps, one of the discharge valves would not open. The employee closed the intake pump to cool off the system and open the discharge valve. Two employees opened the inlet valve to return the tank to service. After they cracked open the inlet valve, a side wall of the tank blew out, causing the injured employee to suffer steam burns to half their body.
An employee was testing and troubleshooting the gang cylinder valve located in the gang area of the sawmill. The employee's fingertip was amputated by the gang cylinder valve.
An employee was unlocking containers on deck. The employee was de-lashing while standing on the edge of the lid. The lashing bar he was holding came off the cone, causing him to turn 90 degrees and strike a railing behind him. The employee sustained four fractured ribs.
An employee parked a side-by-side on the fixed internal ramp aboard a cargo ship. They exited the side-by-side and went to inspect the cargo below. The side-by-side rolled toward the employee and struck them as they were walking toward the edge of the ramp. The employee was knocked off the ramp and landed on the lower deck approximately 8 feet below. The employee was hospitalized with a fractured shoulder.