105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Limoges Construction, Inc.

Compressed or pinched by shifting objects or equipment · Amputations

Federal OSHA recorded a severe workplace injury at Limoges Construction, Inc., 5500 East Blarney Pl, SIOUX FALLS, SOUTH DAKOTA 57110 on — Amputations, affecting the fingertip(s).

An employee was attempting to hook up a ground heater to a truck, but the trailer wasn't hooking up properly. His finger was between the ball hitch and receiver when the trailer dropped onto the hitch, pinching his left ring finger. His fingertip was amputated.

Hospitalized Amputation Fingertip(s) Trailers

Limoges Construction, Inc.

An employee was shearing rebar to different lengths. The rebar shear's hold-down clamp crushed the employee's right hand.

Limoges Construction, Inc.

An employee was guiding a concrete power trowel into the back of a pickup truck. The trowel was being lifted by a chain attached to a forklift. As the trowel was being lowered into the pickup truck by the forklift, the employee's right ring finger was pinched between the trowel handle and the side of the pickup truck bed, resulting in an amputation with no bone loss.

Limoges Construction, Inc.

An employee was cutting rebar with a cut-off saw when the employee's clothing caught fire, causing burns to approximately 70% of the employee's body.

View Limoges Construction, Inc.'s full OSHA safety record →

TForce Freight

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

Liveo Research, Inc.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

Best Pump and Flow

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

FORD MOTOR COMPANY

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

Lasseter Tractor Company. Inc.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

WADDELL CONCRETE INC.

An employee was readjusting a safety hook to remove hardware from gang forms when his feet slipped. He fell to the ground, resulting in a broken left arm and wrist.

BRUNDAGE-BONE CONCRETE PUMPING, INC.

An employee was changing a boom pipe delivery system on a concrete pump truck. He tripped and fell from an elevated level to the ground, resulting in multiple leg fractures.

Kansas Paving / Kansas Ready Mix

An employee was reading numbers off a belt that feeds a plant. He reached his hand up and the belt caught his finger, resulting in a finger amputation.

Paul Conard Construction Co., Inc

An employee was guiding the pouring end of a concrete pump truck's boom while standing on top of 4-foot wall forms. The boom contacted power lines and the employee was shocked. The employee sustained third-degree burns on the entry and exit path of the electricity, and also sustained first- and second-degree burns to their torso and legs.

Mid Illinois Concrete & Excavation, Inc.

An employee was holding a form board on a section of pavement. A skid steer backed into the employee's ankle, breaking it. The employee was hospitalized.

Simon Contractors of South Dakota, Inc.

An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.

Agtegra Cooperative

An employee was walking past a crossover conveyor when a ramp came down and hit them in the back. The employee sustained a broken back vertebra, as well as a concussion, and was hospitalized.

Martin Brower Distribution Center

An employee was using a hook tool to pull a pallet onto the lift gate of a tractor trailer. The hook detached from the underside of the pallet, causing the employee to fall backward off the lift gate. The employee landed on the concrete parking lot about 5 feet below, suffering fractures to the skull and two thoracic vertebrae.

Mayfield Truss, LLC

An employee was walking on a truss table when he lost his balance and fell approximately 3 feet to the floor. The employee sustained a dislocated and fractured left ankle.