LAMB & ASSOCIATES PACKAGING, INC.|

An employee was walking from her workstation when a unit of cardboard boxes fell off forklift and onto her left foot, fracturing her ankle.

Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.

An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.

An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.

An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.

An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.

An semi-truck was backing into a loading dock when it struck an employee who was walking on the bay floor. The trailer pinned the employee against the dock bumper. The employee suffered crushing injuries and was hospitalized.

Employees were unloading a box truck using a stand-up lift with pallet fork extenders. As the stand-up lift traveled up an incline, it struck a parked sit-down lift and the injured employee's left ankle was pinched between the lifts, resulting in lacerations and an ankle fracture. The employee was hospitalized.

An employee had just replaced a belt on a silo blower. While the employee was testing the blower by manually turning the belt, the belt and pulley caught the employee's fingertip. The fingertip was amputated.

An employee was setting up the coding station on a piece of equipment when they took a step back and tripped on a guard that was on the floor. The employee fell onto one leg, resulting in a left hip fracture. The employee was hospitalized and required surgery.

An employee was unloading a truck and sustained frostbite to his left index finger due to cold temperatures.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.