BURLINGTON, WISCONSIN—
LDV, Inc.
Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at LDV, Inc., 180 Industrial Drive, BURLINGTON, WISCONSIN 53105 on — Amputations, affecting the fingertip(s).
Final narrative
An employee was using a table saw to cut plywood to size. The employee's right ring and middle fingertips were amputated at the first joint when the fingers came in contact with the table saw blade. The saw was not guarded at the time of the incident.
More severe injuries at LDV, Inc.
BURLINGTON, WISCONSIN—
LDV, Inc.
An employee was clearing metal chips or shavings from a horizontal band saw cutting table when his gloved hand made contact with the saw blade. His hand was pulled into the blade and drive wheel, resulting in an amputation of his right pinky finger at approximately the second joint.
BURLINGTON, WISCONSIN—
LDV, Inc.
An employee was bending a piece of metal in a press brake and pinched fingers between a piece of metal and the outside wall of the press brake. It was used manually and in a semi-automatic phase. The employee sustained a crushed right index fingertip and amputated the left index fingertip.
View LDV, Inc.'s full OSHA safety record →
Similar incidents · Same event type
SOUDERTON, PENNSYLVANIA—
Leidy's LLC
An employee was operating a band saw when his right little fingertip was amputated.
CACTUS, TEXAS—
Swift Beef Company
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
GRAND ISLAND, NEBRASKA—
Kitchen Tune-Up
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
SAINT CLOUD, FLORIDA—
BBCJ LUMBER LLC
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
PORTSMOUTH, OHIO—
Appalachian Wood Floors, Inc.
An employee was using a shaper to cut wood when their right hand contacted the blade, resulting in a partial amputation to the right ring finger.
More severe injuries in this industry (NAICS 336112)
EPHRATA, PENNSYLVANIA—
Smeal LTC LLC
An employee was walking on the top deck of a fire truck that was being assembled. The employee lost their balance and stepped on open, horizontally hinged doors, which could not support their weight. The employee fell 6 feet to the concrete floor and suffered fractures to their elbow and pelvis.
WENTZVILLE, MISSOURI—
GENERAL MOTORS
An employee was assessing an overhead stamping press door for alignment issues when the counterbalance moved and their left thumb was caught between the chain and the sprocket. The thumb was amputated. The door was locked out/tagged out at the time but gravitational pull was not controlled.
ELLABELL, GEORGIA—
LCT Tech America, Inc.
An employee was performing a bubble test (pressure test) on a pipeline to locate a leak when the joint elbow that was producing the leak detached and struck him. The employee sustained fractures to a rib and clavicle, as well as injuries to his spleen and lung.
ANNISTON, ALABAMA—
Anniston Army Depot
An employee was installing a combat vehicle turbine engine to a dynamometer stand in a dynamometer test engine cell. While lining up the turbine engine to the stand, the employee's left arm was fractured between the engine and the face of the stand.
KANSAS CITY, MISSOURI—
CHALLENGE MANUFACTURING LLC
An employee was operating a forklift to retrieve a stack of empty containers from behind a weld cell. The forklift grabbed the stack. Then the forks tilted back, causing the top container to fall onto the forklift cage. The employee got off the forklift and went to pull the container down. The container fell on the employee's head and leg, resulting in a bump to the head and a fractured right leg.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.