Contact with hot objects or substances · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at Shaw Industries, Inc., 200 Industrial Boulevard, BAINBRIDGE, GEORGIA 39817
on — Second degree heat (thermal) burns, affecting the multiple body parts, n.e.c..
Final narrative
An employee was using a shop vacuum to remove a liquid nylon blockage from a machine in the production area. Pressure had built up on the opposite side of the blockage, and as it was removed, the pressurized liquid nylon sprayed out striking the employee. He sustained second degree burns to the face and other burns to both hands and arms.
HospitalizedMultiple body parts, n.e.c.Plastics, resins, n.e.c.
On August 14, 2025, an employee was rebuilding a tile-cutting die when their right wrist contacted the cutting blade, resulting in a laceration that required hospitalization.
On March 25, 2025, at approximately 12:45 PM, an employee was operating a miter saw to cut wood flooring samples. The workpiece shifted, pulling the employee's left hand into the saw blade and resulting in the amputation of the distal phalanx of the middle finger.
While performing routine maintenance on equipment an employee manually rotated the baffle bracket. The employee's fingers were pinched between a baffle and the support frame resulting in a fingertip amputation and lacerations.
An employee was operating a forklift to move a bale of yarn onto a waste scale. After aligning the yarn to the scale, the employee began to back the forklift out. The scale became caught on one of the forklift tines. The employee exited the forklift and attempted to move the yarn bale from the tine. As the bale began to shift, the employee positioned himself to provide resistance against the bale, resulting in a dislocation of the right knee.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 325220)
A temporary employee cut back-wrapped material on an extrusion line. His left hand was caught in the material as he tried to clear it. As the material continued to rotate, the employee's left ring finger was severed, resulting in a partial amputation.
An employee was using a plastic pipe to clear a jam in the shredding equipment. The pipe got stuck in the shredder and went into a vertical position, crushing the employee's left ring finger between the pipe and the top of the shredder shroud. The employee sustained a fingertip amputation.
An employee was operating a stand-up forklift to move a pallet of product that was sitting on the floor in an aisle of the finishing warehouse next to metal racking. The forklift cab went under the middle shelf and his torso became caught between the metal shelf (at his back) and the forklift steering control stick (at his front). He was hospitalized with possible fractured ribs.
An employee was starting to collect edge trim when their right middle and ring fingers came into contact with a shear slitter blade. Half of the ring finger was nearly amputated, and half of the middle finger was amputated.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.