Fall through surface or existing opening, unspecified · Third or fourth degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at Anniston Army Depot, Hill Air Force Base, HILL AIR FORCE BASE, UTAH 84056
on — Third or fourth degree heat (thermal) burns, affecting the foot(feet) and leg(s), n.e.c..
Final narrative
An employee was performing maintenance on a jammed turntable in an industrial parts washer. When he opened up the parts washer and stepped in, a section of screen collapsed and he fell into water that was approximately 180 degrees. He received second and third degree burns on his foot and shin.
HospitalizedFoot(feet) and leg(s), n.e.c.Washers, dryers, and cleaning machinery and appliances, n.e.c.
An employee was installing a combat vehicle turbine engine to a dynamometer stand in a dynamometer test engine cell. While lining up the turbine engine to the stand, the employee's left arm was fractured between the engine and the face of the stand.
An employee was rigging the front of a heavy armored vehicle to offload from a railcar. The employee's right middle and index finger were caught between the rigging hook and the vehicle's engine cover latch hook, causing the amputation of flesh from both fingers.
An employee was securely elevated in a bucket truck when they received an electrical shock from a high-voltage power line. The employee fell down in the bucket after he sustained the shock. The employee then stood up and his basket was lowered to the ground. The employee was hospitalized with burns to both arms and hands.
An employee was pulling on a stackable metal bookshelf while a second employee was pushing it. The first employee slipped and fell to the floor, fracturing the T12 vertebra and requiring hospitalization.
An employee was power washing a metal tank from an elevated platform. They fell through a gap between the platform and the tank. The employee landed on the ground and sustained fractures to their ankles and feet.
An employee was installing a metal roof when he stepped on a skylight. The employee fell through the skylight to the ground, resulting in head and shoulder fractures.
An employee was replacing an HVAC unit in a residential home. While he was in the attic space above the garage, the wood he was walking on broke, causing the employee to fall through the sheetrock to the concrete floor below. The employee bumped his head and sustained a shoulder injury as well as a broken ankle.
An employee was putting a tarp on a water tank while standing on a trailer. She lost her footing and fell through the trailer bed, striking the corner of the trailer bed. The employee sustained internal bleeding.
An employee was repairing a sub-floor in a residential house that had water and fire damage. The employee fell through the sub-floor and landed in the basement, resulting in spinal fractures that required hospitalization.
More severe injuries in this industry (NAICS 488999)
An employee was backing up a sit-down forklift when his left hand struck against a rack. His middle and ring fingers were broken and he was hospitalized.
An employee slipped on a patch of ice and fell, striking his head on the pavement. The employee sustained a subdural hemorrhage with a loss of consciousness and was hospitalized.
An employee parked a commercial motor vehicle at a truck stop. The employee slipped while exiting the vehicle and fell to the ground. The employee was hospitalized with a fractured left distal humerus.
On September 19, 2024, an employee was manually wrapping a pallet with shrink wrap when they slipped on a small piece of wood and fell. The employee landed on the concrete floor and suffered a fractured right hip.
An employee was on a four-step work stand while sanding an area of an aircraft. He was climbing down the work stand when he tripped over an air hose and fell to the level below, resulting in a fractured femur.
An employee was scanning the placards of pallets of mail bundles when a forklift approached from the opposite side and began lowering and pushing his pallet load forward. It struck the pallet the employee was working on, causing it to shift and strike her. She fell to the ground and sustained a left hip fracture that required surgery.
An X-ray machine had lost power and an employee went to replace the power supply. While replacing a cable on the power supply assembly, the employee's right hand contacted the grounding terminals coming out of the back of the power supply assembly and they received an electric shock. The employee was hospitalized.
An employee was servicing equipment and had disconnected a 4-inch line. A proportional control air valve on the equipment actuated, releasing a large volume of air at 99 psi into the 4-inch braided stainless steel line hanging down from the valve. The sudden release of pressure caused the line to whip and strike the employee's face. He was hospitalized due to an orbital bone fracture requiring surgery. The equipment was not locked out/tagged out at the time.
An employee was performing janitorial duties and carrying bathroom supplies when he slipped on a guardrail mounting post and fell on his side. The employee's hip was fractured and required surgery.