Direct exposure to electricity unspecified · Electrocution, electric shock
At a glance
Federal OSHA recorded a severe workplace injury
at Boeing (LMTF), 12000 W 900 S St, OGDEN, UTAH 84404
on — Electrocution, electric shock, affecting the BODY SYSTEMS .
Final narrative
An X-ray machine had lost power and an employee went to replace the power supply. While replacing a cable on the power supply assembly, the employee's right hand contacted the grounding terminals coming out of the back of the power supply assembly and they received an electric shock. The employee was hospitalized.
Hospitalized BODY SYSTEMS Medical imaging and radiological machinery, equipment
An employee was working to start an aerator machine on the front lawn of the customer's property. They pulled the starter cord of the machine and sustained an electrical shock to their right arm/hand.
An employee was adjusting the height of an ultraviolet (UV) lamp. She was electrocuted by the UV machine. She sustained burns on her left hand and an entry wound on the right forearm. The employee was hospitalized.
An employee was operating a horizontal belt sanding machine that rotates a metal sanding belt. The employee switched hands while the belt transitioned from left to right. When the machine's speed was adjusted, the employee s left hand was pulled into the machine and crushed. The employee was hospitalized and required surgery.
On March 19, 2025, an employee was retrieving a medical specimen from the back of a vehicle. When he turned to enter the building, he either tripped over something or lost his footing and fell due to an incline in the pavement. The employee was hospitalized with a head abrasion and injuries to his right shoulder and right hip.
Employees were pulling a chemical sample from a device (sample port). The sample wouldn't come out because there were two samples in the port. The employees then turned off and deenergized the machine to 0 pounds per square inch. They unscrewed the top of the machine to retrieve the stuck samples when a small amount of pressure caused liquid to squirt out and onto one of the employee's face shields as the lid was removed. The employee was hospitalized due to chemical exposure.
An employee was walking around a boiler recovery tank when they stepped into an uncovered U-drain filled with hot water. The employee sustained second-degree burns to their right leg and the top of their foot.
An employee was venting a liquefied natural gas cylinder. Static electricity from a plastic garbage bag on the ground ignited the gas, causing a flash fire. The employee suffered second-degree burns to the hands and face.
An employee was on a four-step work stand while sanding an area of an aircraft. He was climbing down the work stand when he tripped over an air hose and fell to the level below, resulting in a fractured femur.
An employee was scanning the placards of pallets of mail bundles when a forklift approached from the opposite side and began lowering and pushing his pallet load forward. It struck the pallet the employee was working on, causing it to shift and strike her. She fell to the ground and sustained a left hip fracture that required surgery.
An employee was servicing equipment and had disconnected a 4-inch line. A proportional control air valve on the equipment actuated, releasing a large volume of air at 99 psi into the 4-inch braided stainless steel line hanging down from the valve. The sudden release of pressure caused the line to whip and strike the employee's face. He was hospitalized due to an orbital bone fracture requiring surgery. The equipment was not locked out/tagged out at the time.
An employee was performing janitorial duties and carrying bathroom supplies when he slipped on a guardrail mounting post and fell on his side. The employee's hip was fractured and required surgery.
Four employees were on a boat, conducting a fish survey on a river, when the boat struck a sandbar. One employee was launched off the boat, suffered head trauma, and was hospitalized.