105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

JV MANUFACTURING, INC.

Struck by falling object or equipment, n.e.c. · Fractures

Federal OSHA recorded a severe workplace injury at JV MANUFACTURING, INC., 701 Butterfield Coach Road, SPRINGDALE, ARKANSAS 72765 on — Fractures, affecting the leg(s), unspecified.

An employee was cutting the strapping on a bundle of steel square tubing. The bundle was approximately waste high and stacked on top of other material cribbed by 4'x 4' lumber. The bundle fell onto the employee when the last retaining band was cut breaking the employee's right leg.

Hospitalized Leg(s), unspecified Bundles, bales

JV Manufacturing, Inc.

An employee was cleaning up a paint gun when they drank paint thinner from a water bottle. The employee was hospitalized.

JV MANUFACTURING, INC.

An employee was wiping down the face of a large steel door on a piece of equipment. Their right hand was pinched between the hinge and the door frame as the door opened further. The employee sustained a fractured hand and required surgery.

JV MANUFACTURING, INC.

An employee was sweeping trash when a stack of chuting material (6 feet x 3.5 feet) fell and struck their leg. The employee sustained a fractured femur.

JV MANUFACTURING, INC.

An employee was MIG welding the dog house of a self-contained compactor when a spark ignited and his shirt caught on fire. He sustained first and second degree burns to his upper torso and third degree burns to his back.

JV MANUFACTURING, INC.

An employee was disconnecting the existing power source to the cardboard balers when the employee received an electric shock, requiring hospitalization.

View JV MANUFACTURING, INC.'s full OSHA safety record →

Performance Contractors, Inc.

An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.

WIRECO WORLDGROUP, INC.

An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.

Owens & Minor - Pittsburgh Distribution Center

The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.

Retro Tech Systems

Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.

Creston Energy Group

An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.

JRI INDUSTRIES

An employee was manipulating dies on a brake press. The press caught and crushed the employee's right forearm, resulting in hospitalization.

Douglas Machines Corp.

An employee was feeding stainless steel into a shear when the shear amputated four of their fingers. The machine was not guarded.

JV MANUFACTURING, INC.

An employee was wiping down the face of a large steel door on a piece of equipment. Their right hand was pinched between the hinge and the door frame as the door opened further. The employee sustained a fractured hand and required surgery.

JV MANUFACTURING, INC.

An employee was sweeping trash when a stack of chuting material (6 feet x 3.5 feet) fell and struck their leg. The employee sustained a fractured femur.

Alto-Shaam, Inc.

An employee was assembling commercial kitchen products with a handheld nail gun when they tripped over the air hose reel while their finger was on the trigger. A nail was discharged into her left leg above the knee.

NATIONAL MILL MAINTENANCE, LLC

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

The Goodyear Tire & Rubber Company

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

Big River Steel, LLC

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

American Tile & Marble Co., Inc

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

Johnson Industrial Coatings, LLC.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.