JV MANUFACTURING, INC.

An employee was cleaning up a paint gun when they drank paint thinner from a water bottle. The employee was hospitalized.

An employee was sweeping trash when a stack of chuting material (6 feet x 3.5 feet) fell and struck their leg. The employee sustained a fractured femur.

An employee was cutting the strapping on a bundle of steel square tubing. The bundle was approximately waste high and stacked on top of other material cribbed by 4'x 4' lumber. The bundle fell onto the employee when the last retaining band was cut breaking the employee's right leg.

An employee was MIG welding the dog house of a self-contained compactor when a spark ignited and his shirt caught on fire. He sustained first and second degree burns to his upper torso and third degree burns to his back.

An employee was disconnecting the existing power source to the cardboard balers when the employee received an electric shock, requiring hospitalization.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.

An employee was manipulating dies on a brake press. The press caught and crushed the employee's right forearm, resulting in hospitalization.

An employee was feeding stainless steel into a shear when the shear amputated four of their fingers. The machine was not guarded.

An employee was sweeping trash when a stack of chuting material (6 feet x 3.5 feet) fell and struck their leg. The employee sustained a fractured femur.

An employee was assembling commercial kitchen products with a handheld nail gun when they tripped over the air hose reel while their finger was on the trigger. A nail was discharged into her left leg above the knee.

An employee was adjusting the door on a baler using a crane when his finger was caught between the paper dog and the interior of the door as he lowered it into place. The employee sustained an amputation to the left middle finger from the tip to the knuckle.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.