JV MANUFACTURING, INC.

An employee was cleaning up a paint gun when they drank paint thinner from a water bottle. The employee was hospitalized.

An employee was wiping down the face of a large steel door on a piece of equipment. Their right hand was pinched between the hinge and the door frame as the door opened further. The employee sustained a fractured hand and required surgery.

An employee was cutting the strapping on a bundle of steel square tubing. The bundle was approximately waste high and stacked on top of other material cribbed by 4'x 4' lumber. The bundle fell onto the employee when the last retaining band was cut breaking the employee's right leg.

An employee was MIG welding the dog house of a self-contained compactor when a spark ignited and his shirt caught on fire. He sustained first and second degree burns to his upper torso and third degree burns to his back.

An employee was disconnecting the existing power source to the cardboard balers when the employee received an electric shock, requiring hospitalization.

An employee was crouched down in the cooler and was restocking a shelf when a stack of water next to him began to crumple. Approximately 4-5 cases of water fell onto his left side, striking his left foot and knee, as well as the left side of his back. The employee was hospitalized with contusions to his abdominal wall, left chest wall, and his left hip and thigh.

An employee was loading a trailer of automotive parts when the load caught the top of the trailer. He jumped up to clear a wedged item. When the item came down, the load collapsed onto the employee, resulting in a fractured pelvis.

An employee was picking material in a warehouse when a pallet of aluminum profile bundles collapsed on top of him, resulting in a fractured femur.

On July 24, 2025, an employee was unloading stacks of empty, 96-gallon medical waste containers. A stack of 10 containers, which weighed approximately 460 pounds, fell on him. The employee was hospitalized with multiple head, face, and neck injuries and a back injury requiring surgery.

An employee was stocking cement boards when a stack of cement boards fell over and crushed them. The employee sustained fractures to their clavicle and ribs, as well as a punctured lung.

An employee was manipulating dies on a brake press. The press caught and crushed the employee's right forearm, resulting in hospitalization.

An employee was feeding stainless steel into a shear when the shear amputated four of their fingers. The machine was not guarded.

An employee was wiping down the face of a large steel door on a piece of equipment. Their right hand was pinched between the hinge and the door frame as the door opened further. The employee sustained a fractured hand and required surgery.

An employee was assembling commercial kitchen products with a handheld nail gun when they tripped over the air hose reel while their finger was on the trigger. A nail was discharged into her left leg above the knee.

An employee was adjusting the door on a baler using a crane when his finger was caught between the paper dog and the interior of the door as he lowered it into place. The employee sustained an amputation to the left middle finger from the tip to the knuckle.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.