GENERAL PLASTIC EXTRUSIONS, INC.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was removing a bolt from a caliber on a machine with one foot on the platform and the other foot on the piece of equipment. As he went to loosen the bolt, he lost his balance and fell four feet to the ground.

An employee was jogging a loose belt on a machine. The machine's sprocket and belt caught the employee's right hand and lacerated the top of it. The employee was hospitalized.

A pallet had been loaded onto a trolley to be picked up for wrapping, but a broken bottom board on the pallet was blocking an entry roller sensor, tripping it and preventing the trolley from moving. An employee removed the board and the trolley began to travel. Her left knee and thigh were lodged between the framing of the trolley and a stationary pallet insert line. She suffered a laceration to the back of the thigh.

An employee put a roll of lamination film on a lamination machine to laminate (glue) two pieces of film together. When he pushed the button to disengage a roll from the machine, the empty roll moved over and his right middle finger was caught between the metal rod and the core of the laminate roll. The fingertip was amputated.

An employee was traveling forward in a forklift when it struck a support beam. The employee sustained a fractured femur.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.