Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Regal - Hub City, Inc., 2914 Industrial Avenue, ABERDEEN, SOUTH DAKOTA 57401
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was assembling a large gearbox using the lifting hoist. Each end has swivel hooks hooked onto the assembly on the shaft ends. When he went to hook the hoist to the customer end the hook swiveled with his gloved hand on the chain hoist. As the weight shifted, his left index finger was caught between the chain and the chain adjustment resulting in amputation up to the first distal joint.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 333612)
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was operating an overhead crane using a remote control. They went to control the movement of a suspended load and their hand became caught between the suspended load and other objects. The employee sustained amputation of their left little finger.
An employee was working on an extruder line and changing the spool when the line became tangled. The employee went to remove the line from the roller when his left hand was pulled into it, becoming caught between the line and the roller. The employee sustained amputations of his index, middle, and ring fingertips.
An employee was preparing for a quality audit when they slipped on oil on the floor and fell to the floor. The employee was hospitalized with a leg injury.
A crane was lowering a piston into a carriage slot. An employee was guiding the piston when his glove got caught under the piston and his left middle fingertip was amputated.
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.
An employee was walking past a crossover conveyor when a ramp came down and hit them in the back. The employee sustained a broken back vertebra, as well as a concussion, and was hospitalized.
An employee was using a hook tool to pull a pallet onto the lift gate of a tractor trailer. The hook detached from the underside of the pallet, causing the employee to fall backward off the lift gate. The employee landed on the concrete parking lot about 5 feet below, suffering fractures to the skull and two thoracic vertebrae.
An employee was walking on a truss table when he lost his balance and fell approximately 3 feet to the floor. The employee sustained a dislocated and fractured left ankle.