Federal OSHA recorded a severe workplace injury
at Precision Geophysical, Inc., West Kittanning, KITTANNING, PENNSYLVANIA 16201
on — Fractures, affecting the pelvis.
Watch Precision Geophysical, Inc. — freeGet an email when a new federal OSHA severe-injury report for Precision Geophysical, Inc. is published. One employer, no account, unsubscribe in one click.
Final narrative
Four employees were in a utility terrain vehicle (UTV) going up-hill when it tipped backwards and rolled down the hill. Two employee were hospitalized. One employee was hospitalized for a broken pelvis and the second employee was hospitalized for leg injuries.
An employee was operating a sit-down type of material handling equipment (MHE). They were turning the MHE with the clamp attachment in the air when the MHE fell over onto its right side. The employee's right foot was caught under the battery cover of the MHE. The employee sustained a chemical burn from the battery and a fractured right ankle.
An employee was driving an unloaded forklift outside a building. During a left turn, the forklift drove off the paved area onto an unpaved surface, became unstable, and tipped over. The employee was pinned under the forklift and suffered two broken leg bones and a broken hip.
An employee was trimming tree branches from an aerial lift. As they were maneuvering the aerial bucket lift from inside, the truck drove over soft ground and tipped over. The bucket lift fell to the ground with the employee tied off inside, resulting in rib fractures.
More severe injuries in this industry (NAICS 541360)
An employee was performing surveying work and was actively engaged in laying out geophysical nodes as part of a seismic exploration project. This task required the employee to carry and place geophysical equipment at specific intervals along the survey path, under outdoor environmental conditions. The employee sustained heat stroke.
At about 9:15 a.m. on March 10, 2025, an employee was riding along a hardpack snow-covered roadway on a snowmobile. The snowmobile went over a berm and tipped/rolled, causing the employee to fall to the ground. He suffered a collapsed left lung and was hospitalized.
A survey instrument operator was watching the survey crew chief perform a topographic survey on an existing bridge abutment wingwall. The employee moved down the side slope behind the wingwall to take survey shots of the top of the wingwall. He slipped and fell over a 15-foot abutment wall, onto wood brush and the ground below, landing on his back. The employee sustained a fractured vertebra in his back.
An employee was working on the outside of the facility when they were struck by a forklift, resulting in fractures to their nose, three ribs, and left leg.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.