Safety Incidents OSHA Severe Injury Reports · 2015–2025
105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31

Rosendin Electric Inc.

Direct exposure to electricity, greater than 220 volts · Second degree electrical burns

Federal OSHA recorded a severe workplace injury at Rosendin Electric Inc., 1807 Dennis Road, FORT MEADE, MARYLAND 20755 on — Second degree electrical burns, affecting the nonclassifiable.

Watch Rosendin Electric Inc. — free Get an email when a new federal OSHA severe-injury report for Rosendin Electric Inc. is published. One employer, no account, unsubscribe in one click.

An employee was working on a piece of electrical equipment when his wrench came in contact with an energized electrical box. An arc flash occurred, causing first and second degree burns to the employee.

Hospitalized Nonclassifiable Switchboards, switches, fuses

Rosendin Electric, Inc.

An employee was troubleshooting an open circuit at the solar panel power generating area. When he disconnected the connectors from the power generating panel an arc flash occurred., causing third-degree burns to the tops and palms of each of his hands.

Rosendin Electric, Inc.

An employee was moving a steel-plated skate/equipment pallet across the floor. The employee's right middle finger was caught between the skate and the floor. The fingertip was amputated with no bone loss.

Rosendin Electric, Inc.

While unloading a reel of wire with a pallet jack, the wheels of the pallet jack rolled off the truck's lift gate causing the wire and the pallet jack to flip over onto the ground and strike the employee's ankle and fracturing it.

View Rosendin Electric Inc.'s full OSHA safety record →

Star Pipe USA LLC

An employee was making modifications to an electrical panel when an arc flash occurred. The employee suffered burns to multiple parts of the body.

Star Electric Company of Texas

An employee was installing a ground wire to a power transmission pole. The ground wire contacted an energized portion of a cut-out, causing an arc-flash. The employee was hospitalized with second degree burns to their chest and arms.

Powertown Line Construction LLC

An employee was connecting a utility transformer for underground service to a home. The employee's impact drill went across two connection bars with 240 volts of potential, creating an arc flash. The employee sustained burns to the face and eyes due to the arc flash and molten aluminum.

Stanley Black and Decker, Inc

On December 15, 2023, at 9:15 AM, an employee was changing 60-amp fuses in a 480-volt panel when an arc flash occurred. The employee was hospitalized with burns to both hands.

Sun Valley Contractors, LLC

An employee had just turned off breakers and was loosening wires on panels when they were shocked by 480 volts of electricity.

Smart Building Technologies - A Fidelity Company

An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.

Abbott Electric Inc

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

Mintcrest Corp

An employee was standing on an A-frame ladder approximately 6 feet above the floor while he attached a suspended light fixture to the ceiling. The employee lost balance, and fell to the tiled floor below, sustaining blunt force trauma to his head.

Cupertino Electric, Inc.

An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.

Swedberg Electric, LLC

The injured employee was performing routine maintenance on a fan belt/pulley. The injured employee and another person were moving the pulley back and forth manually to find a bearing issue. The injured employee's left ring finger got caught between the belt and the pulley wheel, resulting in a soft tissue amputation.

United States Marshals Service

An employee was closing a gun locker in his automobile trunk when his left middle finger was partially amputated by the lid.

National Security Agency

An employee was ascending a flight of stairs after exiting their vehicle in an adjacent employee parking lot. The employee stepped to the right to avoid another employee on the left who was descending the stairs. The employee lost their balance and fell on the stairs. They were hospitalized with a laceration/abrasion to their chin, a fractured left humerus, and bruising to their left knee.

U.S. Postal Service

A mail handler was moving BMCs on the loading dock when they fell from the loading dock to the concrete ground below. The employee was hospitalized with head trauma.

SJW Contractors

An employee was on an A-frame ladder while preforming demolition of a ceiling. A section of HVAC ductwork fell on the employee and knocked them to the ground approximately 12 feet below. The employee was hospitalized with a concussion and lacerations.

U.S. Department of Army

On the morning of July 24, 2025, an employee was conducting synthesis of a highly toxic experimental chemical (nerve agent) in a chemical fume hood. The operation was completed at approximately 11:30 AM. The employee was exposed to the chemical and began experiencing symptoms of illness/poisoning around 1:30 PM and was hospitalized.