Injured by handheld object or equipment, n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Prime Incorporated, 130 Armstrong Road, PITTSTON, PENNSYLVANIA 18640
on — Fractures, affecting the eye(s).
Final narrative
An employee was using an industrial hand drill to make a hole in a cinder block. The drill bit caught a snag and the drill spun around in the employee's hand, causing him to lose his grip. He was then struck by the drill and suffered an orbital bone fracture on his face and blood clot behind his eye.
An employee severely injured his right-hand pinky finger while changing brakes on a truck tractor. The tool used to hold tension on the brake components slipped, and the components crushed the finger.
An employee was using a circular saw to cut flashing. He was finished with the cut and started walking away when his fall protection ropes became entangled in the saw and the saw was pulled into his leg. The employee sustained a left hamstring laceration.
An employee had finished sharpening a knife on the grinding wheel and was returning it when he lost grip of the handle. As the employee reached to catch the it, his abdomen was lacerated by the knife blade in the right lower quadrant.
An employee was removing an ambulance off a lift jack when the pressure against the jack caused the handle to kick upward, striking the employee on the left side of the head, neck, and jaw. The employee suffered injuries that required hospitalization.
An employee was installing a flange on an evaporator skid. The employee was holding the bar of a torque wrench when his hand was caught in the pinch point as another employee turned the wrench. He suffered a right middle fingertip amputation.
An employee was using a hand grinder to eliminate discrepancies on columns around the project when the grinder jumped and came out of the employee's hands. They sustained a little finger amputation.
More severe injuries in this industry (NAICS 811111)
An employee was repairing the suspension of a semi-trailer. He was installing an air bag to the suspension when his left ring finger was crushed between the air bag and the suspension mounting beam. The employee was hospitalized.
A mechanic had just finished a repair on a straight truck with a flatbed , which had been lifted using a bottle jack. As the employee was about to remove the jack, it failed. The truck shifted forward, dropped down, and struck the employee's chest. He suffered broken ribs and a broken shoulder.
An employee was performing diagnostic work on a vehicle engine. As the employee was leaning over the front of the vehicle, the engine was activated. A fuel leak had produced fumes around the engine, and the ignition spark ignited them. The employee suffered second-degree burns to both hands, both biceps, and the upper chest area.
An employee was hot patching a tire, which involves lighting a flammable liquid on fire to patch the tire. The flammable liquid contacted his arm, and he sustained burns to his arms and face.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.