Struck by falling object or equipment, unspecified · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Guida-Seibert Dairy, Inc., 433 Park Street, NEW BRITAIN, CONNECTICUT 06051
on — Fractures, affecting the leg(s), unspecified.
Final narrative
An employee was hospitalized after a stack of slip sheets fell and hit his right leg, fracturing it.
An employee was leaving a truck at the end of his shift. As he climbed down the stairs built into the tailgate, he slipped, hit his forehead on the truck (suffering a forehead laceration that required stitches), and then fell backwards to the ground, breaking his left wrist.
An employee was unloading 30-foot 2-inch barrels from a pan holding about 20 barrels. The barrels tipped over, striking and breaking both of the employee's lower legs.
An employee was in a sandblasting area, preparing the surface of a plate heat exchanger frame for painting. The frame fell on the employee, who suffered fractures to vertebrae, the neck, pelvis, and rib cage; and punctured lungs.
An employee was performing rear brake shoe service on a truck. The employee was using a prybar to remove a spring when the spring slipped from the S-cam and amputated his left index fingertip.
An employee was unjamming a case that was stuck in a case washer machine when their pants became entangled in a chain, causing them to be sprayed with hot water from the machine. They employee suffered burns from the hot water.
An employee was clearing a cup jam on a cup conveyor when their left hand was caught between the conveyor and an idler roller located on another conveyor line directly above the jam. The employee received an abrasion and friction burn to the hand that required hospitalization.
An employee was performing routine maintenance on an air valve when their right ring finger became caught in the valve. The employee sustained an amputation to the fingertip.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.