Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Hansen Construction, Inc., 3400 Belcaro Drive, DENVER, COLORADO 80209
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
A temporary employee was ripping a board on a table saw when it kicked back. His left hand then contacted the blade, partially amputating his fingers.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
An employee was on an extension ladder descending from a roof when the ladder collapsed and lowered. The employee fell approximately 20 feet to the ground, resulting in fractures to their ribs and left wrist.
The injured employee was acting as a spotter for another employee that was using a forklift to move crane plates. The injured employee went to walk on top of staged bracing poles that had been stacked. The top layer of bracing shifted when stepped on, causing the employee to lose balance and fall. During the fall, one of the bracing poles dislodged and landed on the employee s left leg, causing a compound fracture.
An employee was working to remove an existing window from a customer's home. The employee was descending an extension ladder when they fell backward onto a concrete patio. The employee sustained head trauma and fractures to their shoulder, ribs, and a vertebra.
An employee was painting the exterior of a house when they fell approximately 12 feet from a ladder. They landed on the ground and sustained a fractured right ankle.
An employee climbed a ladder onto a roof, then stepped from new roof sheathing onto a tarped section of old roof, and fell to the ground. The employee suffered fractures to their pelvis, vertebrae, and the left wrist. The employee was hospitalized.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.