HORMEL FOODS CORPORATION

An employee was cleaning a label cutter drum with a rag. His left index finger was caught in the cutter resulting in amputation of the fingertip.

An employee was pulling paper through the bottom of a transfer belt and amputated their right index fingertip.

Employees were moving an auger to do repairs on the filler bowl. As the two employees touched the auger, they experienced an electrical shock. One employee was hospitalized with electrical burns.

On November 23, 2022, an employee was using a meat cutting machine. The machine became jammed and upon clearing the jam, the employee sustained an amputation to the left index finger.

An employee was clearing a jam in a baking mold press when their hand became caught. The employee was hospitalized for a wrist sprain and hand injury that required stitches.

The injured employee was installing fan belts and alternators. Another employee came into the work area with a torque gun and began poking the injured employee with the tip of the torque gun and then activated the tool. The spinning tip of the torque gun caught the injured employee's left glove and amputated her middle finger.

An employee was working on a hot strip mill when a co-worker approached from behind and pushed in the back of the employee's left knee, causing it to buckle. The employee fell to the ground and sustained torn ligaments in the left knee.

An employee sustained a broken arm while arm wrestling with another employee.

Employee 1 fell on employee 2's leg, causing several fractures in employee 2's leg that required hospitalization.

Two employees were involved in horseplay while walking when one employee fell and struck their head on the concrete floor resulting in a concussion.

An employee was scraping dried glue from the top lid of a hot glue pot. His left hand slipped and came into contact with the hot glue. He then suffered burns to his hands and fingers as he tried to remove the glue. He was hospitalized.

An employee was in a scissor lift approximately 20 feet above the ground to place a plastic tarp on a catwalk in order to catch condensation. They positioned the lift opposite the work area and stepped out of the scissor lift onto an I-beam. The employee fell from the I-beam to the ground. The employee was hospitalized with a skull fracture on the right side of their head and injuries to the chest and both eyes.

A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.

The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.

An employee was using a box strapping machine to place straps on boxes when his right middle finger was caught in the machine, resulting in an open fracture to the distal phalanx.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.