105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Poly-America LP

Contact with hot objects or substances · Heat (thermal) burns, unspecified

Federal OSHA recorded a severe workplace injury at Poly-America LP , 2000 W. Marshall Dr., GRAND PRAIRIE, TEXAS 75051 on — Heat (thermal) burns, unspecified, affecting the arm(s), unspecified.

Watch Poly-America LP — free Get an email when a new federal OSHA severe-injury report for Poly-America LP is published. One employer, no account, unsubscribe in one click.

An employee was starting a plastic extrusion line when hot plastic burned his arm. PPE was not worn at the time of the incident.

Hospitalized Arm(s), unspecified Resins

Poly-America, LP

An employee was using a tabletop date code stamper to record information on cardboard packaging when his finger was caught between the stamper head and base of the stamper, resulting in a finger amputation. The plexiglass face had been removed from the stamp at the time of the incident.

Poly-America, LP

An employee was transporting a pallet of plastic with a forklift when a roll of plastic fell off. The employee stopped the forklift and was trying to stop the plastic from rolling away when his left leg was pinned between the roll of plastic and a metal post resulting in a fractured leg.

Poly-America, LP

An employee was installing a small motor when the motor slipped out of his hands. The motor fell onto his hands and onto the ground. His left index finger was caught and amputated between the motor and the ground.

View Poly-America LP 's full OSHA safety record →

OQ Chemicals

An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.

Husbe Zoaq

An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.

The Cumberland Rest Inc. dba Trinity Terrace

An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.

Mueller & Wilson Inc

An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.

Oklahoma Steel & Wire Co., LLC

An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.

General Polymeric Corporation

An employee was monitoring a rotary press when his left hand became caught in the machinery. The employee's left middle finger was amputated at the distal interphalangeal joint.

MCM Plastics, Inc.

An employee was sweeping in an area with powdered PVC on the floor and began having difficulty breathing and coughing up blood, The employee was hospitalized for inhalation of PVC.

Lawter Inc.

An employee was working on a pastillator machine, which processes resin-based materials into solid pastilles. His right hand became caught between the feed roller (operating at approximately 350 F) and the cooling belt. The employee s glove and shirt sleeve adhered to his arm due to the heat. The employee sustained third-degree burns to his right hand and forearm, requiring hospitalization and surgery.

AdvanSix, Inc.

An employee was troubleshooting a leak on a low pressure (less than 50 PSI) condensate line in the oxidation area of the plant. He was working to remove insulation around a valve when either the valve or the line failed, and hot condensate contacted his right arm, right abdomen area, and the front of both legs, resulting in second- and third-degree burns.

Rochling Machined Plastics

An employee was replacing a fan on a cooling unit. As he went to adjust a pump, the unit caught his right hand and the fan blades severely lacerated his index finger. He underwent a medical amputation to the finger.

T G Meat Center LLC

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

Professional Flooring Supply

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

EnviroSafe Demil LLC

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

Inteplast Group

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

Regency IHS of Fairwinds Halletsville, LLC

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.