J.R. Simplot Company

An employee was on horseback roping a calf to be branded. The horse jumped and the employee fell to the ground. The employee was hospitalized for multiple broken ribs.

A crew was preparing a 20-foot section of 12-inch high-density polyethylene (HDPE) pipe to be swung into a welder using an excavator, where it would be welded onto a longer run of pipe. One employee was facing the longer pipe in the welder while the 20-foot section was being rigged. The 20-foot section moved and struck the employee's left knee. The employee's left leg was broken below the knee.

An employee was struck by a car backing up in the parking lot, resulting in broken bones in the leg and a severed artery. The leg was medically amputated above the knee.

An employee was realigning a "rover cart" on a track when they were struck from behind by a "rover cart" on a different track. The employee sustained a fractured right leg with a punctured vein.

An employee was checking a shredder machine to ensure it was clean. Their fingers were caught and crushed inside the machine resulting in an amputation.

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

An employee was troubleshooting to determine why a pallet was not traveling along a continuous vertical conveyor. The conveyor's rollers caused a crushing/laceration injury to the employee's right hand that required surgery.

An employee was operating a pallet end rider when it struck a rack. The employee's right foot was pinned and fractured between the forklift and the rack.

An employee was putting a machine guard back onto a chain and sprocket when their left middle finger became caught in the chain and sprocket. The employee sustained an amputation of the fingertip.

An employee was changing out a hose on a chemical tote. The fitting for the tote disengaged and the employee was exposed to peracetic acid that caused chemical burns and respiratory distress.

An employee was helping to dismantle an old piece of equipment (descrambled bottle machine) when a metal plate fell and pinched his left middle finger against the wall. The employee sustained a severe laceration that required surgery and amputation.

An employee fell from a dock to ground level (less than 4 feet) and broke their tibia/knee.

An employee was on the ground working to close a trailer door. The door was caught by the wind and blew the employee backward. He landed on his back and sustained four fractured ribs, requiring hospitalization.

An employee was walking on top of boiler to close a valve. The employee fell off the boiler and landed on the floor, sustaining fractured ribs. The employee was hospitalized.

An employee was exiting a loader and coming down the ladder. His hand slipped off the railing and he fell backward onto sandy ground, landing on his side. The employee was hospitalized with a fractured pelvis and a rotator cuff tear.

An employee's left bicep was lacerated by high-pressure water during water blasting operations. The employee was hospitalized.