CARDINAL IG COMPANY

An employee was cleaning an area around a conveyor section in the tempering department when their left thumb contacted a drive shaft with a pulley. The employee was hospitalized and their left thumb was partially amputated.

An employee was walking down an aisle in a warehouse when they were struck by a forklift. The employee sustained a laceration and hematoma to the head as well as a right rib fracture.

An employee was stacking racks for transporting insulated glass units. He was placing the fourth rack on top. It failed to settle onto the pins at first, then fell into place when bumped. It crushed the tip of his right little finger, causing a fingertip amputation.

An employee fell and broke his upper right leg when stepping down from a 24-inch-high A-frame cart used to transport glass.

An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.

An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.

The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.

Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.

An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.

An employee was operating a machine and went to remove a buildup of desiccant from the machine. Their right index finger was pinched between two moving parts, resulting in an amputation to the finger.

On September 3, 2025, an employee was working on the left-side charger of a tank. They were using a ratchet with an extension to make an adjustment to the sand seal when their right thumb was pinched between the ratchet and the running charger, resulting in an amputation at the first knuckle.

A forklift was placing an elevated load onto a truck. The forklift tipped forward and fell on the injured employee who was standing nearby. The employee sustained fractures to their hip and ribs, as well as leg muscle injuries.

At 12:09 p.m. on July 11, 2025, an employee was inspecting the dust collection system in a plant. The employee was checking an airlock to determine whether there was suction when their left index and middle fingers were pinched between the rotating rotor and the housing of the airlock. The employee suffered amputations of both fingertips without bone loss.

An employee was manually removing a bearing from a vertical washer brush. Due to the weight of the brush roll, it released and crushed his left ring fingertip resulting in amputation without bone loss.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.