105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Tamarack Mill, LLC

Caught in running equipment or machinery during regular operation · Amputations

Federal OSHA recorded a severe workplace injury at Tamarack Mill, LLC , 3555 HWY 95, NEW MEADOWS, IDAHO 83654 on — Amputations, affecting the arm(s), n.e.c..

An employee was clearing a board from an auto edger when the employee's coat was caught in a sprocket. The rotating equipment then amputated the employee's arm.

Hospitalized Amputation Arm(s), n.e.c. Boring, drilling, planing, milling machinery, n.e.c.

Tamarack Mill, LLC

An employee was inside the saw box performing cleaning activities when the system was re-energized. The rollers activated, pulling the employee toward the saw blades. The employee was hospitalized with severe injuries including multiple lacerations, deep tissue damage, and fractures.

Tamarack Mill, LLC

An employee was operating a restacker machine. The employee accessed the outfeed area, immediately to the right of the yellow guardrail, and the hoist came down hitting the employee and pinning him to the floor. The employee was found unconscious having suffered head and neck injuries.

Tamarack Mill LLC

An employee's hand was caught in a planer amputating his right thumb and index finger.

Tamarack Mill, LLC

An employee was checking lumber sizes in a "safe zone" about 18-20 ft from the board edger when a board broke while being processed. The wooden pieces were ejected, striking and injuring the employee 20 ft away. The employee sustained a broken nose, injuries to the face and loss of consciousness.

View Tamarack Mill, LLC 's full OSHA safety record →

Pall Corporation

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

Koch Foods of Cincinnati

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

Stella-Jones Corporation

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

Mack Manufacturing, Inc.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

Nutmeg Container Corporation

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

Claude Howard Lumber Company

An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.

Shintech Inc

An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.

West Fraser, Inc.

An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.

SWS Sawmill, LLC

An employee was working to get a log back onto a carriage. The employee came into contact with the running saw, which amputated their arm.

IDAHO FOREST GROUP, LLC

While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.

Mondelez Global LLC

An employee tripped over a bin and fell to the floor. She landed on her hip and braced herself with her arm, resulting in a fractured hip and wrist.

Milk Specialties Global

An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.

UPSON COMPANY

An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.

Cupertino Electric, Inc.

An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.

STEEL STRUCTURES AMERICA INC

An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.