Struck by running powered equipment during maintenance, cleaning, testing · Other multiple traumatic injuries n.e.c.
At a glance
Federal OSHA recorded a severe workplace injury
at Tamarack Mill, LLC, 3555 HWY 95, NEW MEADOWS, IDAHO 83654
on — Other multiple traumatic injuries n.e.c., affecting the Part of body unspecified.
Final narrative
An employee was inside the saw box performing cleaning activities when the system was re-energized. The rollers activated, pulling the employee toward the saw blades. The employee was hospitalized with severe injuries including multiple lacerations, deep tissue damage, and fractures.
Hospitalized Part of body unspecified Log processing machinery
An employee was operating a restacker machine. The employee accessed the outfeed area, immediately to the right of the yellow guardrail, and the hoist came down hitting the employee and pinning him to the floor. The employee was found unconscious having suffered head and neck injuries.
An employee was clearing a board from an auto edger when the employee's coat was caught in a sprocket. The rotating equipment then amputated the employee's arm.
An employee was checking lumber sizes in a "safe zone" about 18-20 ft from the board edger when a board broke while being processed. The wooden pieces were ejected, striking and injuring the employee 20 ft away. The employee sustained a broken nose, injuries to the face and loss of consciousness.
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 321113)
An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.
An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.
An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.
While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.