Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Exide Technologies, 413 E. Berg Road, SALINA, KANSAS 67401
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was clearing a jam on a pasting line. While trying to clear the jam, the employee jogged the machine into reverse. As a result, his gloved left hand was pulled into the machine. The employee then reversed direction of the machine to "forward" and jogged the machine to free his hand resulting in amputation of the ring finger.
HospitalizedAmputationFinger(s), fingernail(s), n.e.c.Special process machinery, n.e.c.
While maintenance employees were evaluating an actuator on top of his work box, the injured employee supplied air to see which direction controlled the valve. When the air released, the injured employee's left index fingertip was amputated by the actuator valve.
An employee was using a hand torch while a second employee was cleaning the floor 2 to 3 feet in front of the hand torch. While the second employee was standing in front of the wall-mounted hand torch array, an internal explosion dislodged the cover, which then struck her in the back of the head. She was hospitalized with a concussion and laceration to the back of the skull.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 335911)
An employee was operating material handling equipment when their right foot was caught between the material handling equipment and a railing. The employee sustained fractures to the big toe and second toe.
An employee was operating a forklift when it collided with another forklift at an intersection. The employee suffered a broken lower right leg from a rack of battery plates on the forks of the other truck.
Four employees were moving a 400-pound flange to the ground when part of the load was released and the injured employee's hand became caught between the flange and the ground. The employee sustained a left middle fingertip amputation.
An employee was recycling material by adding it to a molten lead pot. The employee came in contact with the molten lead and suffered burns to the lower back and shoulder.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.