Kevin Charles Furniture

Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.

An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.

An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.

An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.

An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.

An employee was riding a pallet jack toward the breakroom when the pallet jack struck an order picker and the employee's foot was fractured.

On September 13, 2024, the injured employee was walking through an aisle where a co-worker was removing pallets from the racking system using an order picker. The corner of a pallet being moved contacted the corner of a skid next to it, causing two empty pallets to fall 12 to 16 feet from the racking onto the injured employee. The employee sustained a laceration and contusions to the back of their head and left shoulder.

An employee was operating a panel saw. The machine malfunctioned and the employee went behind it to try and fix it. When he adjusted a valve, the machine activated and moved forward trapping him between the beam and the wood preparing to load. The employee sustained fractured ribs and injury to the abdomen and chest areas.

An employee was cutting wood parts on a band saw. The saw cut her left index finger at the knuckle closest to the palm and the employee sustained an amputation to the left index finger.

An employee was clearing a jam in a T-nut insertion machine when it cycled, resulting in a left index fingertip amputation.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.