Caught between rolling powered vehicle and other object · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at Worldwide Flight Services, Inc., IAH-RAMP 19115 Lee Rd Bldg , HUMBLE, TEXAS 77338
on — Cuts, lacerations, affecting the lower leg(s).
Final narrative
An employee was using a tractor tug to move equipment. The employee dismounted the tug to hook up a bobtail cargo truck. When he was between the tug and the cargo truck, the tug shifter popped out of neutral, allowing the tug to run into and pin the employee, causing deep lacerations to both of his shins. He was hospitalized. The tug was running, and the shifter was not all the way in neutral at the time of the incident.
An employee was retrieving a water bottle from the operator compartment of a unit load device transporter. The transporter accelerated and ran over her foot, causing lacerations to the skin surrounding her toes that required hospitalization and surgery.
An employee was connecting dollies loaded with unit load devices (ULDs) and crushed his left ring finger between a dolly tongue and the hitch of another dolly, resulting in amputation of the fingertip.
On September 16, 2024, an employee was on the ladder of a loader assisting with offloading an aircraft when they fell 10 feet from the ladder to the floor. The employee sustained fractured wrists and vertebrae.
An employee was at the scale station and was struck by bag tug that was backing up to connect the tug hitch to the dolly tongue. The employee was pinned between the dolly and the tug, resulting in a fractured femur that required surgery and hospitalization.
On December 13, 2023, an employee was operating a forklift. When they stepped off the forklift, it crushed their left foot between the lift and a racking system. The employee suffered a foot fracture that required hospitalization.
An employee was maneuvering a motorized pallet jack while standing in front of it. He became pinned between the pallet jack and a steel rack cross-beam, resulting in a contusion to his chest/back and a fractured rib.
An employee was stacking empty drums into a trailer. The employee then exited the trailer, using the forks of a forklift as a step. The forklift's parking brake failed, causing the forklift to move forward and pin the employee's right leg between the forklift and the trailer. The employee's right lower leg was crushed, resulting in a fracture and a laceration.
An employee had been spraying weeds behind a school. As he was leaving the field, the employee drove his truck up to the gate, got out, and opened the gate. The truck rolled forward and pinned him against the fence/gate. The gate then gave way and opened from the force of the truck. The employee's left index fingertip got caught in the fence/gate and was amputated.
An employee was using a walk-behind tugger to pull a grinder. The employee's left little finger was pinched between the handle of the tugger and the framework of a staircase. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 488320)
While preparing to install a new spool piece for a vapor and spent sulfuric acid line, an employee was working to ensure there was no residual product or pressure in the line before removing the 6-inch hose. The valve was cracked, and some spent acid still in the line sprayed out. The employee was standing off to the side and at a distance, but was still contacted by the hot acid, resulting in corrosive and thermal burns to their upper torso and mid-thighs of both legs.
An employee was driving a utility tractor rig when it struck the rear trailer of another utility tractor rig, which was traveling in the opposite direction. The glancing impact caused damage to the cab, and he sustained a laceration on right side of his face, a cervical fracture, two fractured left ribs, and a pelvic fracture. The employee was hospitalized.
The injured employee was standing by the controls for the electric spud system on the barge, preparing to raise the spuds. Meanwhile, an excavator was moving a mat on the deck. As the excavator swung from port to starboard, it's counterweight struck the injured employee s shoulder, causing them to lose balance and fall against the spud controls. The employee sustained bruises and contusions to their right shoulder and chest.
An employee was standing on the outside edge of a hopper barge while watching a skid steer push ore for an excavator (with a clamshell bucket) to unload. The excavator was on a work barge. The bucket of the excavator struck the employee and caused a near-amputation of their right arm and fractures of the ulna and radius of the left arm. The right arm required surgery.
An employee was inspecting a conveyor to see why it was not running. The employee entered the the conveyor motor area, tripped on a piece of angle iron welded to the floor, and fell. The employee sustained a fractured orbital bone.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.