Federal OSHA recorded a severe workplace injury
at JBS Packerland, 1330 Lime Kiln Road, GREEN BAY, WISCONSIN 54311
on — Fractures, affecting the foot (feet), unspecified.
Final narrative
On February 25, 2018, an employee was operating a standup forklift and was following another standup forklift. When the first forklift slowed at an intersection, the injured employee's forklift collided with the first forklift. The forklift tine entered the operator's station and struck the injured employee's right foot resulting in a fracture requiring surgery and hospitalization.
HospitalizedFoot (feet), unspecifiedForklift, order picker, platform truck-powered
Employee 1 was operating a stand-up forklift on an incline ramp. Employee 2 was operating another stand-up forklift behind employee 1. Employee 2's leg became caught between the two forklifts and fractured.
Two forklifts were traveling down a warehouse aisle. The one in the rear struck the one in front, and its operator suffered an injury to the left heel. He was hospitalized.
An employee was driving a forklift while carrying a pallet. A second forklift driver was directly behind the first forklift traveling in the same direction. The pallet blocked the safety sensor on the first forklift, causing it to suddenly stop. The second forklift then hit the first one and the employee on the first forklift suffered two broken legs. One of the leg fractures was a compound fracture.
An employee was turning a walkie forklift when he pulled out in front of a hi-rise lift that was approaching the end of the aisle. The hi-rise was unable to stop and pinned his right lower leg against the walkie, breaking his tibia.
An employee was operating a forklift and collided with another forklift traveling in the same direction resulting in amputation of a toe on the right foot.
More severe injuries in this industry (NAICS 311611)
An employee was scraping dried glue from the top lid of a hot glue pot. His left hand slipped and came into contact with the hot glue. He then suffered burns to his hands and fingers as he tried to remove the glue. He was hospitalized.
An employee was in a scissor lift approximately 20 feet above the ground to place a plastic tarp on a catwalk in order to catch condensation. They positioned the lift opposite the work area and stepped out of the scissor lift onto an I-beam. The employee fell from the I-beam to the ground. The employee was hospitalized with a skull fracture on the right side of their head and injuries to the chest and both eyes.
A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.
The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.
An employee was using a box strapping machine to place straps on boxes when his right middle finger was caught in the machine, resulting in an open fracture to the distal phalanx.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.