Tire Centers LLC

An employee was using an air impact wrench to tighten lug nuts on the vehicle he was servicing. His glove got caught on the rotating spindle as he was tightening the lug nuts on the vehicle and the employee suffered an open fracture and amputation of his left little fingertip.

An employee was inflating a tire on an RV when a piece of molding flew off and struck another employee in the head causing a laceration.

An employee was using an air compressor on a multi-wheel tire when the flange and the tire burst, causing the wheel's lock ring to strike the employee in the face. He sustained a laceration and facial fractures.

An employee was changing the connection to a compressed nitrogen tank when the system failed and exploded. One employee suffered a concussion and was hospitalized. The other employee sustained soft tissue injuries that did not require hospitalization.

An employee was putting air in a tire that was mounted on a customer's vehicle when the tire exploded, resulting in a left arm fracture that required hospitalization.

An employee was working in a kitchen when a spray can of oil exploded. Hot oil splashed onto the employee, burning their face and arms.

On October 24, 2023, at 12:00 PM, an employee was visually checking a gauge on the "U" controller when a pressure tank exploded. The employee was hospitalized with multiple facial fractures and required surgery.

An employee was using a welder when their hand got caught in the roller, resulting in partial amputation of their middle finger.

An employee was rolling a rear tire for a tractor to a customer's building. The tire started to tip and the employee went to stop it by stepping into the middle of the tire. The edge of the tire struck his head and knocked him to the ground and the tire landed on his head. The employee was hospitalized with a fractured and dislocated left hip that required surgery and a scalp laceration.

An employee was pulling a metal skid off a stack to place the skid on the floor. The weight of the skid shifted and the edge caught the employee's right middle finger, resulting in a partial amputation.

An employee was operating an order picker in a warehouse. While backing down an aisle, the employee struck a 60-inch-by-60-inch pallet being lifted by another order picker. The employee suffered a tear to the cartilage surrounding their hip.

At about 1:25 p.m. on August 7, 2024, a temporary employee was operating a foam ring cutter when its pin broke, causing the head to fall and hit his left hand. He suffered a partial amputation to the ring finger, as well as a laceration and nail damage to the middle finger.

An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.